EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance and Compressive Behaviour of Plastic Waste–Based Brick under Horizontal and Vertical Loading Orientations

Nicco Plamonia, Agung Riyadi, Sarjono Sarjono, Hadi Supratikta, Gani Soehadi, Maria Holly Herawati, Sutrisno Hutagalung, Budi Kurniawan, Muhamad Komarudin, Ignatius Subagjo, Etty Sisdiana

Future Cities and Environment · 13.07.2026 · 12 · 20

DOI: 10.70917/fce-2026-015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Future Cities and Environment, online erschienen am 13.07.2026. Verfasst von Nicco Plamonia und 10 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic waste–based bricks (PW-Bricks) offer a promising pathway for plastic waste valorisation in the construction sector; however, their mechanical performance is commonly evaluated using a single compressive strength metric that does not reflect actual masonry loading conditions. This study investigates the compressive behaviour of PW-Bricks under horizontal and vertical loading and proposes an orientation-sensitive evaluation framework for mix optimization. PW-Bricks incorporating 20–50% plastic waste were fabricated alongside conventional cement–sand bricks as control specimens and tested at curing ages of 3, 7, and 10 days following ASTM C109/C109M-21. The results demonstrate a pronounced orientation-dependent response. Under horizontal loading, compressive strength increased with plastic waste content and curing age, reaching 30.15 MPa for PW-Bricks containing 50% plastic waste at 10 days, compared with 22.74 MPa for conventional bricks. In contrast, under vertical loading, PW-Bricks exhibited relatively low and nearly constant compressive strengths ranging from 1.08 to 1.22 MPa, whereas conventional bricks achieved 2.48 MPa at 10 days. To evaluate this trade-off, normalized horizontal and vertical strength indices were integrated into a composite performance index balancing enhanced horizontal resistance with minimum vertical stability requirements. Based on this evaluation, PW-Bricks containing 40% plastic waste were identified as the optimal mix, providing the most favourable balance between mechanical performance, material homogeneity, and sustainability. The proposed framework offers a transferable methodology for evaluating heterogeneous waste-based masonry materials and supports application-oriented mix design for non-load-bearing and semi-structural masonry systems.

Zitieren

APA

Plamonia, N., Riyadi, A., Sarjono, S., Supratikta, H., Soehadi, G., Herawati, M. H., Hutagalung, S., Kurniawan, B., Komarudin, M., Subagjo, I., & Sisdiana, E. (2026). Mechanical Performance and Compressive Behaviour of Plastic Waste–Based Brick under Horizontal and Vertical Loading Orientations. Future Cities and Environment, 12, 20. https://doi.org/10.70917/fce-2026-015

Vancouver

Plamonia N, Riyadi A, Sarjono S, Supratikta H, Soehadi G, Herawati MH, et al. Mechanical Performance and Compressive Behaviour of Plastic Waste–Based Brick under Horizontal and Vertical Loading Orientations. Future Cities and Environment. 2026;12:20. doi:10.70917/fce-2026-015

BibTeX
@article{Plamonia2026,
  author = {Plamonia, Nicco and Riyadi, Agung and Sarjono, Sarjono and Supratikta, Hadi and Soehadi, Gani and Herawati, Maria Holly and Hutagalung, Sutrisno and Kurniawan, Budi and Komarudin, Muhamad and Subagjo, Ignatius and Sisdiana, Etty},
  title = {Mechanical Performance and Compressive Behaviour of Plastic Waste–Based Brick under Horizontal and Vertical Loading Orientations},
  journal = {Future Cities and Environment},
  year = {2026},
  volume = {12},
  pages = {20},
  doi = {10.70917/fce-2026-015}
}
Kostenlos starten →