EUVIMEDEUVIMED entdecken
Crossref

Compressive Strength Behaviour of Plain Weave Fabric Composites under Uniaxial and Biaxial Loading

Yusuf Şahin

Key Engineering Materials · 13.11.2026 · 1064 · 23-32

DOI: 10.4028/p-dr4qwp ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.11.2026. Verfasst von Yusuf Şahin. Die Arbeit nennt 26 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, the prediction model for compressive strength of plain weave fabric reinforced composites (PWFCs) is developed using an analytical solution for a three-layer laminate [0°/90°/0°] under uniaxial compression (σ x only) and biaxial compression (σ x /σ y = 2/1) conditions. Results are compared with tensile strength predictions from previous studies, and both Tsai-Hill and Tsai-Wu failure criteria are applied and benchmarked against literature values. The results revealed that for the [0°/90°/0°] layup, all compressive loading cases are governed by transverse matrix crushing in the 90° ply. The uniaxial compressive strength (136–144 MPa) is only 22–23% of the tensile strength (617 MPa). This large tension–compression asymmetry arises from the low transverse compressive strength (140 MPa) combined with stress concentration in the 90° layer. Further, under biaxial compression, failure occurs at just 28–33 MPa — a 77–80% reduction from uniaxial compressive strength and a 95% reduction from the tensile benchmark. Tsai-Wu predicts 5–14% lower failure loads than Tsai-Hill under compressive loading. The [0°/90°/0°] stacking is poorly optimized for compressive or biaxial loading; incorporating ±45° plies is recommended to improve biaxial compressive performance.

Zitieren

APA

Şahin, Y. (2026). Compressive Strength Behaviour of Plain Weave Fabric Composites under Uniaxial and Biaxial Loading. Key Engineering Materials, 1064, 23-32. https://doi.org/10.4028/p-dr4qwp

Vancouver

Şahin Y. Compressive Strength Behaviour of Plain Weave Fabric Composites under Uniaxial and Biaxial Loading. Key Engineering Materials. 2026;1064:23-32. doi:10.4028/p-dr4qwp

BibTeX
@article{ahin2026,
  author = {Şahin, Yusuf},
  title = {Compressive Strength Behaviour of Plain Weave Fabric Composites under Uniaxial and Biaxial Loading},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1064},
  pages = {23--32},
  doi = {10.4028/p-dr4qwp}
}
Kostenlos starten →