EUVIMEDEUVIMED entdecken
Crossref

Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles

Adil I. Kadim, Zainab Waleed Ahmed, Zainab S. Abdul-Ridha, Bushra H. Hussein, Hind W. Abdullah

Revista Cultura Científica · 15.11.2026 · 2026 (24) · 2417-2427

DOI: 10.70517/revcc2624194 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista Cultura Científica, online erschienen am 15.11.2026. Verfasst von Adil I. Kadim und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Orange peel waste offers a potential particulate filler for polymer composites, but its influence depends on particle size, loading, and the property being considered. This experimental study examines polyester composites containing orange peel particles with nominal sizes of 125, 212, and 250 μm at mass fractions of 2, 4, 6, and 8 wt.%, alongside unfilled polyester. The peels were washed, oven-dried at 60 °C for 30 min, ground, and separated into the three size fractions before mixing and casting. The reported measurements comprise tensile stress–strain behavior, tensile strength, Young’s modulus, flexural strength, Shore D hardness, and thermal conductivity. The summary plots indicate that the 125 μm fraction generally produced the highest values, with tensile strength, modulus, and flexural strength reaching their highest reported measurement values at 6 wt.%. Young’s modulus increased from 385 to 674 MPa, whereas hardness increased from 36.8 to 66.36 Shore D units and reached its maximum at 8 wt.%. Thermal conductivity increased from 0.00109 to 0.03673 W/(m·K). The tensile-strength summary reports an increase from 29.504 to 50.592 MPa, although its unfilled reference conflicts with the stress–strain curves and requires reconciliation. The results suggest property-specific responses rather than a single optimum formulation: additional filler beyond 6 wt.% reduced several mechanical responses while hardness and conductivity continued to increase for the smallest particles. Missing uncertainty estimates and an unresolved tensile-reference discrepancy limit quantitative interpretation. The findings support further evaluation of orange peel as a polyester filler, without establishing biodegradability, improved thermal insulation, or application-level performance.

Zitieren

APA

Kadim, A. I., Ahmed, Z. W., Abdul-Ridha, Z. S., Hussein, B. H., & Abdullah, H. W. (2026). Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles. Revista Cultura Científica, 2026(24), 2417-2427. https://doi.org/10.70517/revcc2624194

Vancouver

Kadim AI, Ahmed ZW, Abdul-Ridha ZS, Hussein BH, Abdullah HW. Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles. Revista Cultura Científica. 2026;2026(24):2417-2427. doi:10.70517/revcc2624194

BibTeX
@article{Kadim2026,
  author = {Kadim, Adil I. and Ahmed, Zainab Waleed and Abdul-Ridha, Zainab S. and Hussein, Bushra H. and Abdullah, Hind W.},
  title = {Improving the thermal and mechanical features of polyester reinforced with orange peel waste micro-particles},
  journal = {Revista Cultura Científica},
  year = {2026},
  volume = {2026},
  number = {24},
  pages = {2417--2427},
  doi = {10.70517/revcc2624194}
}
Kostenlos starten →