EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties

Mariola Jureczko iD, Małgorzata Dziekońska iD, Tomasz Czapla iD, Bożena Gzik-Zroska iD, Kamil Joszko iD

Materials · 12.02.2026 · 19 (4) · 705

DOI: 10.3390/ma19040705 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.02.2026. Verfasst von Mariola Jureczko und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwic…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the European Funds for Silesia 2021-2027 Program co-financed by the Just Transition Fund - project entitled "Development of the Silesian biomedical engineering…, Development of the Silesian biomedical engineering potential in the face of the challenges of the digital and green economy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the context of global trends in sustainability and the circular economy (CE), this article aims to investigate the potential of microparticles derived from citrus peel waste (grapefruit, key lime, lemon, and orange), constituting approximately 50% of the fruit weight, as eco-friendly bio-fillers in polymer composites, thereby reducing the consumption of petrochemical resins. The composites were fabricated by gravity casting using polyester resin (PR) as the matrix at filler concentrations of 2.5%, 5%, and 10% by weight. Functional properties were assessed using static tensile testing (measuring Peak Load, Peak Stress, and Young’s modulus) and Shore D hardness testing. The incorporation of unprocessed fillers generally decreased tensile strength (Peak Stress REF: 31.48 MPa), attributed to poor interfacial adhesion. The lowest Peak Stress value was recorded for the 2.5O composite (16.04 MPa). The exception was the 10K composite (10 wt.%key limee), which achieved a Peak Load (1.28 kN) nearly identical to the neat resin (1.29 kN), although the Peak Stress remained lower due to the reduced effective cross-sectional area. Stiffness (Young’s modulus REF: 3.26 GPa) increased by more than 10 wt.% for 5G (3.63 GPa), indicating effective reinforcement at this concentration. A key positive finding was a universal increase in Shore D hardness across all biocomposites (REF: 78.4 ShD), with a maximum of 83.8 ShD for 10L (lemon), a typical response to rigid fillers that suggests enhanced surface resistance. The results suggest that citrus peel waste could be considered for non-structural applications where surface durability and efficient waste management are priorities.

Schlagwörter

Stichwörter der Autor:innen

bio-fillerscircular economycitrus peel wastemechanical propertiespolyester resin composites

Autor:innen und Institutionen

  • Department of Theoretical and Applied Mechanics, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland.
  • Department of Engineering Materials and Biomaterials, Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland.
  • Department of Biomechatronics, Faculty of Biomedical Engineering, Silesian University of Technology, ul. Roosevelta 40, 41-800 Zabrze, Poland.

ORCID-Profile: Mariola Jureczko, Małgorzata Dziekońska, Tomasz Czapla, Bożena Gzik-Zroska, Kamil Joszko

Förderung

  • the European Funds for Silesia 2021-2027 Program co-financed by the Just Transition Fund - project entitled "Development of the Silesian biomedical engineering…
  • Development of the Silesian biomedical engineering potential in the face of the challenges of the digital and green economy

Zitieren

APA

Jureczko, M., Dziekońska, M., Czapla, T., Gzik-Zroska, B., & Joszko, K. (2026). Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties. Materials, 19(4), 705. https://doi.org/10.3390/ma19040705

Vancouver

Jureczko M, Dziekońska M, Czapla T, Gzik-Zroska B, Joszko K. Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties. Materials. 2026;19(4):705. doi:10.3390/ma19040705

BibTeX
@article{Jureczko2026,
  author = {Jureczko, Mariola and Dziekońska, Małgorzata and Czapla, Tomasz and Gzik-Zroska, Bożena and Joszko, Kamil},
  title = {Use of Citrus Peel Waste as Bio-Fillers in Polyester Resin Composites: Analysis of Mechanical Properties},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {4},
  pages = {705},
  doi = {10.3390/ma19040705}
}
Kostenlos starten →