EUVIMEDEUVIMED entdecken
Crossref

Microfluidic cooling for high-heat-flux chips: Thermal-path compression, bottleneck migration and near-junction limits

Junjie Wei, Shuyuan Lin, Junhao Fu, Zhangchi Zhao, Ning Wei

Thermo-X · 2026

DOI: 10.70401/tx.2026.0024 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermo-X, 2026. Verfasst von Junjie Wei und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-heat-flux chips in high-performance computing, heterogeneous integration, and wide-bandgap electronics are reaching a thermal-management ceiling: transistor-scale hotspots, dense stacks, and low-conductivity interlayers force heat through resistive, interface-rich paths before it reaches the coolant. Microfluidic cooling can support 102-103 W/cm2 heat fluxes and higher local loads, yet it is often framed as a competition among microchannels, jets, manifolds, two-phase structures, and high-conductivity spreaders. This review reconstructs the field through thermal-path compression and bottleneck migration, using cooling-boundary location, compressed resistance segment, and residual limit as organizing axes. As cooling advances from package-integrated schemes to embedded/interposer and near-junction architectures, the dominant limit shifts from package-side conduction to hotspot spreading, solid–solid/solid–liquid interfacial resistance, hydraulic allocation, and confined phase instability. Representative architectures are assessed through heat flux, pressure drop, area-normalized thermal resistance, and evidence maturity, emphasizing that record heat flux is not transferable without defined heated area, temperature criterion, coolant state, hydraulic cost, and device boundary. We further distinguish proof-of-concept thermal vehicles from device-relevant, package-compatible, and deployment-oriented platforms by considering manufacturability, sealing and leakage risk, semiconductor-process compatibility, coolant/material compatibility, and scale-up to large-area or multi-chip systems. Interface engineering and diamond-enabled platforms show that high intrinsic conductivity is useful only through reliable, low-resistance, and manufacturable interfaces. This framework recasts microfluidic cooling as near-junction co-design rather than a heat-flux race.

Zitieren

APA

Wei, J., Lin, S., Fu, J., Zhao, Z., & Wei, N. (2026). Microfluidic cooling for high-heat-flux chips: Thermal-path compression, bottleneck migration and near-junction limits. Thermo-X. https://doi.org/10.70401/tx.2026.0024

Vancouver

Wei J, Lin S, Fu J, Zhao Z, Wei N. Microfluidic cooling for high-heat-flux chips: Thermal-path compression, bottleneck migration and near-junction limits. Thermo-X. 2026. doi:10.70401/tx.2026.0024

BibTeX
@article{Wei2026,
  author = {Wei, Junjie and Lin, Shuyuan and Fu, Junhao and Zhao, Zhangchi and Wei, Ning},
  title = {Microfluidic cooling for high-heat-flux chips: Thermal-path compression, bottleneck migration and near-junction limits},
  journal = {Thermo-X},
  year = {2026},
  doi = {10.70401/tx.2026.0024}
}
Kostenlos starten →