EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Utilizing Additive Manufacturing for Economical Prosthetic Limb Prototyping: A Guide from Regression Modelling

Adekunle Ibrahim Musa, Adebanjo Oluwakayode Sukanmi, Folorunsho Uthman Oluwadamilare

Asian Health, Science and Technology Reports · 2024

DOI: 10.69650/ahstr.2024.2210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Asian Health, Science and Technology Reports, 2024. Verfasst von Adekunle Ibrahim Musa und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the development of a low-cost prosthetic limb using additive manufacturing techniques, guided by anthropometric data and regression modeling. Anthropometric measurements were collected from 250 healthy young adults to characterize limb dimensions. Statistical analysis revealed the mean, standard deviation, and range for right and left leg and elbow lengths. A regression model was formulated to estimate limb lengths based on these measurements. A robust regression model demonstrated a significant correlation (r = 0.993, r² = 0.986) between right limb measurements and corresponding left limb measurements, indicating that right leg and elbow lengths could accurately predict left side measurements. The derived regression equation (RLL = 2.253 + 0.959 LLL + 0.054 LEL) provides a practical tool for designing customized prosthetics. Utilizing 3D printing technology, these findings can enhance the production of tailored prosthetic limbs, improving comfort and functionality for users. The study recommends further validation across diverse populations, integration into clinical practices, and continued research and development supported by policy and funding initiatives. These steps will advance the accessibility and effectiveness of personalized prosthetic solutions.

Zitieren

APA

Musa, A. I., Sukanmi, A. O., & Oluwadamilare, F. U. (2024). Utilizing Additive Manufacturing for Economical Prosthetic Limb Prototyping: A Guide from Regression Modelling. Asian Health, Science and Technology Reports. https://doi.org/10.69650/ahstr.2024.2210

Vancouver

Musa AI, Sukanmi AO, Oluwadamilare FU. Utilizing Additive Manufacturing for Economical Prosthetic Limb Prototyping: A Guide from Regression Modelling. Asian Health, Science and Technology Reports. 2024. doi:10.69650/ahstr.2024.2210

BibTeX
@article{Musa2024,
  author = {Musa, Adekunle Ibrahim and Sukanmi, Adebanjo Oluwakayode and Oluwadamilare, Folorunsho Uthman},
  title = {Utilizing Additive Manufacturing for Economical Prosthetic Limb Prototyping: A Guide from Regression Modelling},
  journal = {Asian Health, Science and Technology Reports},
  year = {2024},
  doi = {10.69650/ahstr.2024.2210}
}
Kostenlos starten →