EUVIMEDEUVIMED entdecken
Crossref

Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites

Arslan Kaptan, Serdar Mercan, Fuat Kartal

Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi · 2024

DOI: 10.69560/cujast.1497189 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi, 2024. Verfasst von Arslan Kaptan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of process parameters on kerf width in abrasive waterjet (AWJ) machining of glass fiber reinforced polymer (GFRP) composites. The experimental analysis was conducted using a Taguchi L27 orthogonal array to optimize the machining parameters: pressure, feed rate, abrasive flow rate, and standoff distance. The top kerf width (TKW) and bottom kerf width (BKW) were measured to evaluate the impact of these parameters. Results indicate that higher pressures and abrasive flow rates generally increase both TKW and BKW due to enhanced material removal rates. Conversely, increased feed rates tend to reduce kerf widths, highlighting the importance of optimizing cutting speeds. Standoff distance exhibited a less pronounced effect but still influenced the kerf widths. The optimal parameters for minimizing TKW and BKW were identified, providing valuable insights for improving precision and efficiency in AWJ machining of GFRP composites. These findings contribute to the development of more effective manufacturing practices for high-performance composite materials.

Zitieren

APA

Kaptan, A., Mercan, S., & Kartal, F. (2024). Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites. Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi. https://doi.org/10.69560/cujast.1497189

Vancouver

Kaptan A, Mercan S, Kartal F. Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites. Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi. 2024. doi:10.69560/cujast.1497189

BibTeX
@article{Kaptan2024,
  author = {Kaptan, Arslan and Mercan, Serdar and Kartal, Fuat},
  title = {Influence of Process Parameters on Kerf Width in Abrasive Waterjet Machining of GFRP Composites},
  journal = {Sivas Cumhuriyet Üniversitesi Bilim ve Teknoloji Dergisi},
  year = {2024},
  doi = {10.69560/cujast.1497189}
}
Kostenlos starten →