Load--Settlement Error Transformation and Model Selection for Axially Loaded Augered Piles
Geotechnical Science and Engineering Journal · 15.02.2026 · 2026 (1) · 2-27
DOI: 10.68304/gsej2026.a101 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geotechnical Science and Engineering Journal, online erschienen am 15.02.2026. Verfasst von Robert E. Dickinson.
Abstract (Originalsprache)
Axial pile serviceability depends on settlement at a prescribed load, whereas a load--settlement curve is often assessed through the load predicted at measured displacement. This study quantifies the difference between those error directions for augered piles. Compression records with explicit load and displacement units, identified construction, positive diameter and an origin-anchored loading envelope provide 98 tests with calculated responses. Both directions can be evaluated over the complete normalized-load interval for 83 model--test pairs. Symmetric load error, diameter-normalized settlement error and joint-agreement intervals are combined with a finite-error compliance relation and matched model selection. At half the maximum measured load, 13 of 33 pairs within a 10% load-error criterion exceed the corresponding relative settlement criterion. The preferred formulation changes in 12 of 26 matched comparisons when selection uses settlement RMS rather than force RMS. Equal compilation weighting reduces the reversal frequency from 46.2% to 25.6%, exposing the influence of test grouping. A model's connecting stiffness determines how a modest load discrepancy becomes a larger settlement discrepancy. Inverse settlement error and common curve coverage are therefore necessary companions to load-based curve assessment. The calculated agreement intervals describe these pile responses.
Zitieren
APA
Dickinson, R. E. (2026). Load--Settlement Error Transformation and Model Selection for Axially Loaded Augered Piles. Geotechnical Science and Engineering Journal, 2026(1), 2-27. https://doi.org/10.68304/gsej2026.a101
Vancouver
Dickinson RE. Load--Settlement Error Transformation and Model Selection for Axially Loaded Augered Piles. Geotechnical Science and Engineering Journal. 2026;2026(1):2-27. doi:10.68304/gsej2026.a101
BibTeX
@article{Dickinson2026,
author = {Dickinson, Robert E.},
title = {Load--Settlement Error Transformation and Model Selection for Axially Loaded Augered Piles},
journal = {Geotechnical Science and Engineering Journal},
year = {2026},
volume = {2026},
number = {1},
pages = {2--27},
doi = {10.68304/gsej2026.a101}
}
EUVIMED