A Double-Hardening Elastoplastic Load-Transfer Model for Assessing Load-Carrying Performance of Axially Loaded Piles
Buildings · 19.06.2026 · 16 (12) · 2442
DOI: 10.3390/buildings16122442 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 19.06.2026. Verfasst von Yexun Li und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Accurate prediction of the load–settlement response of axially loaded piles remains challenging because the pile–soil interface undergoes progressive elastoplastic shear deformation accompanied by stress-dependent volumetric changes. Conventional one-dimensional load-transfer models are computationally efficient but usually rely on empirical or hyperbolic fitting functions, making it difficult to explicitly describe the coupled evolution of interface shear hardening, volumetric hardening, and radial effective stress. Although three-dimensional elastoplastic models provide a more rigorous mechanical representation, their high computational cost limits routine engineering application. To address this gap, this study develops a double-hardening elastoplastic load-transfer model for axially loaded piles based on a physically interpretable pile–soil interface constitutive formulation. In the proposed model, the Hardening Soil model is used to characterize interface shear hardening, while the Modified Cam-clay model is introduced to describe volumetric hardening. These two mechanisms are coupled through a stress–dilatancy relationship. According to the loading direction and the position of the current stress point relative to the shear and volumetric yield surfaces, the p′–q stress plane is divided into elastic, shear-hardening, volumetric-hardening, and coupled double-hardening regions. The corresponding incremental constitutive equations are derived and embedded into a conventional load-transfer framework. The model is validated using interface direct shear tests and field-scale static pile load tests. The predicted shear stress–displacement curves and pile-head load–settlement responses agree well with the measured data. Quantitative evaluation shows that the MAPE values are lower than 5%, the maximum relative errors are below 7.6%, and the R2 values exceed 0.96 for all validation cases.
Zitieren
APA
Li, Y., Zhang, Y., Liu, H., Wang, X., Qiu, S., Yu, J., & Li, L. (2026). A Double-Hardening Elastoplastic Load-Transfer Model for Assessing Load-Carrying Performance of Axially Loaded Piles. Buildings, 16(12), 2442. https://doi.org/10.3390/buildings16122442
Vancouver
Li Y, Zhang Y, Liu H, Wang X, Qiu S, Yu J, et al. A Double-Hardening Elastoplastic Load-Transfer Model for Assessing Load-Carrying Performance of Axially Loaded Piles. Buildings. 2026;16(12):2442. doi:10.3390/buildings16122442
BibTeX
@article{Li2026,
author = {Li, Yexun and Zhang, Yunzhe and Liu, Haoyu and Wang, Xian and Qiu, Song and Yu, Jian and Li, Lin},
title = {A Double-Hardening Elastoplastic Load-Transfer Model for Assessing Load-Carrying Performance of Axially Loaded Piles},
journal = {Buildings},
year = {2026},
volume = {16},
number = {12},
pages = {2442},
doi = {10.3390/buildings16122442}
}
EUVIMED