EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study the comprising between TIG and MIG process and their effect on the mechanical properties and microstructure of the welding joints for low carbon steel

Mohamed Rajab Budar, Mohamed Etuohami Swei, Almuntasir Miftah Ahmid, Samir Sghayer Abubakar, Sami D. Jabu

Arraid Journal of Science and Technology ( AJST) · 30.06.2026 · 3 (1) · 88-97

DOI: 10.67878/ajst.v3i1.154 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Arraid Journal of Science and Technology ( AJST), online erschienen am 30.06.2026. Verfasst von Mohamed Rajab Budar und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

TIG welding produces superior quality, cleaner and stronger joints in thin low-carbon steel due to precise heat control, while MIG welding offers higher productivity and deeper penetration, making it ideal for thicker sections. TIG typically results in finer microstructures (acicular ferrite) compared to the coarser grains often found in MIG. A review of the literature indicates that both welding techniques—whether used individually or in combination—achieve full weld penetration, and that the heat-affected zone in TIG-MIG welding is wider than in standalone TIG or MIG welding. TIG-MIG joints typically exhibit ductile fracture behavior compared to joints produced by standalone MIG or TIG welding. Nevertheless, they demonstrate favorable properties, such as tensile strength, when compared to the individual TIG and MIG processes. Furthermore, a comparison between TIG-MIG techniques and conventional MIG welding reveals a more refined joint appearance, as evidenced by the various microstructures of the joints.

Zitieren

APA

Budar, M. R., Swei, M. E., Ahmid, A. M., Abubakar, S. S., & Jabu, S. D. (2026). Study the comprising between TIG and MIG process and their effect on the mechanical properties and microstructure of the welding joints for low carbon steel. Arraid Journal of Science and Technology ( AJST), 3(1), 88-97. https://doi.org/10.67878/ajst.v3i1.154

Vancouver

Budar MR, Swei ME, Ahmid AM, Abubakar SS, Jabu SD. Study the comprising between TIG and MIG process and their effect on the mechanical properties and microstructure of the welding joints for low carbon steel. Arraid Journal of Science and Technology ( AJST). 2026;3(1):88-97. doi:10.67878/ajst.v3i1.154

BibTeX
@article{Budar2026,
  author = {Budar, Mohamed Rajab and Swei, Mohamed Etuohami and Ahmid, Almuntasir Miftah and Abubakar, Samir Sghayer and Jabu, Sami D.},
  title = {Study the comprising between TIG and MIG process and their effect on the mechanical properties and microstructure of the welding joints for low carbon steel},
  journal = {Arraid Journal of Science and Technology ( AJST)},
  year = {2026},
  volume = {3},
  number = {1},
  pages = {88--97},
  doi = {10.67878/ajst.v3i1.154}
}
Kostenlos starten →