Integrated Analytical Modeling of Material Removal Rate and Surface Roughness in Magnetic Levitation EDM of Ti-6Al-4V
International Research Journal of Innovation in Science and Technology · 23.04.2026 · 1 (2) · 32-38
DOI: 10.67308/irjist.013 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Research Journal of Innovation in Science and Technology, online erschienen am 23.04.2026. Verfasst von Gaurav Sanap und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Electrical Discharge Machining (EDM) has emerged as a critical non-conventional machining process for difficult-to-machine materials such as Ti-6Al-4V, widely used in aerospace and biomedical applications. However, achieving an optimal balance between material removal rate (MRR) and surface roughness (Ra) remains a significant challenge due to complex thermal, plasma, and electro-physical interactions involved in the process. This study presents an integrated analytical and experimental investigation of MRR and surface roughness in Magnetic Levitation EDM of Ti-6Al-4V under varying discharge conditions. A structured experimental framework was developed by systematically varying peak current, pulse-on time, and pulse-off time while maintaining a constant servo voltage. The results reveal a direct relationship between peak current and MRR, accompanied by a deterioration in surface quality due to increased discharge energy and crater formation. A clear trade-off between machining productivity and surface integrity is observed, consistent with findings reported in advanced machining and surface enhancement processes. The proposed analytical approach, based on discharge energy principles, establishes a predictive framework for evaluating EDM performance. This study contributes toward improved parameter selection and supports multi-objective optimization of machining efficiency and surface quality in high-performance titanium alloys.
Zitieren
APA
Sanap, G., Sanap, V., Patil, T., & Kadu, A. (2026). Integrated Analytical Modeling of Material Removal Rate and Surface Roughness in Magnetic Levitation EDM of Ti-6Al-4V. International Research Journal of Innovation in Science and Technology, 1(2), 32-38. https://doi.org/10.67308/irjist.013
Vancouver
Sanap G, Sanap V, Patil T, Kadu A. Integrated Analytical Modeling of Material Removal Rate and Surface Roughness in Magnetic Levitation EDM of Ti-6Al-4V. International Research Journal of Innovation in Science and Technology. 2026;1(2):32-38. doi:10.67308/irjist.013
BibTeX
@article{Sanap2026,
author = {Sanap, Gaurav and Sanap, Vishal and Patil, Tanmay and Kadu, Aryan},
title = {Integrated Analytical Modeling of Material Removal Rate and Surface Roughness in Magnetic Levitation EDM of Ti-6Al-4V},
journal = {International Research Journal of Innovation in Science and Technology},
year = {2026},
volume = {1},
number = {2},
pages = {32--38},
doi = {10.67308/irjist.013}
}
EUVIMED