EUVIMEDSkopri EUVIMED
Crossref

EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING

Almira Serikhan, Aidar Kenesbekov, Temirlan Kusainov

Journal of Surface Engineering and Coating Technology · 2026

DOI: 10.66310/swhc3599 ↗

At a glance

Journal article in Journal of Surface Engineering and Coating Technology, 2026. Written by Almira Serikhan and 2 co-authors. 18 references.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study investigated the effects of the SiO₂–NiCr composition and thermomechanical consolidation method on the microstructure, phase composition, mechanical properties, and tribological behavior of composites produced by spark plasma sintering (SPS) and hot pressing. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray fluorescence analysis, Vickers hardness measurements, and tribological testing. The composites exhibited a heterogeneous cermet structure, with Ni and Cr distributed in the metallic constituent and SiO₂ forming the oxide phase. The maximum Vickers hardness, 2020.2 ± 165.9 HV, was recorded for the hot-pressed sample with an SiO₂/NiCr ratio of 70/30. The minimum mean coefficient of friction (0.135) was obtained for the SPS-produced sample with a 50/50 composition. The results demonstrate that both composition and consolidation method substantially affect the microstructure, phase composition, hardness, and tribological properties of SiO₂–NiCr composites.

Cite

APA

Serikhan, A., Kenesbekov, A., & Kusainov, T. (2026). EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING. Journal of Surface Engineering and Coating Technology. https://doi.org/10.66310/swhc3599

Vancouver

Serikhan A, Kenesbekov A, Kusainov T. EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING. Journal of Surface Engineering and Coating Technology. 2026. doi:10.66310/swhc3599

BibTeX
@article{Serikhan2026,
  author = {Serikhan, Almira and Kenesbekov, Aidar and Kusainov, Temirlan},
  title = {EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  doi = {10.66310/swhc3599}
}
Start for free →