EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING
Journal of Surface Engineering and Coating Technology · 2026
DOI: 10.66310/swhc3599 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, 2026. Verfasst von Almira Serikhan und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.
Abstract (Originalsprache)
This study investigated the effects of the SiO₂–NiCr composition and thermomechanical consolidation method on the microstructure, phase composition, mechanical properties, and tribological behavior of composites produced by spark plasma sintering (SPS) and hot pressing. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray fluorescence analysis, Vickers hardness measurements, and tribological testing. The composites exhibited a heterogeneous cermet structure, with Ni and Cr distributed in the metallic constituent and SiO₂ forming the oxide phase. The maximum Vickers hardness, 2020.2 ± 165.9 HV, was recorded for the hot-pressed sample with an SiO₂/NiCr ratio of 70/30. The minimum mean coefficient of friction (0.135) was obtained for the SPS-produced sample with a 50/50 composition. The results demonstrate that both composition and consolidation method substantially affect the microstructure, phase composition, hardness, and tribological properties of SiO₂–NiCr composites.
Zitieren
APA
Serikhan, A., Kenesbekov, A., & Kusainov, T. (2026). EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING. Journal of Surface Engineering and Coating Technology. https://doi.org/10.66310/swhc3599
Vancouver
Serikhan A, Kenesbekov A, Kusainov T. EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING. Journal of Surface Engineering and Coating Technology. 2026. doi:10.66310/swhc3599
BibTeX
@article{Serikhan2026,
author = {Serikhan, Almira and Kenesbekov, Aidar and Kusainov, Temirlan},
title = {EFFECT OF COMPOSITION AND CONSOLIDATION METHOD ON THE MICROSTRUCTURE, HARDNESS, AND TRIBOLOGICAL PROPERTIES OF SiO₂–NiCr COMPOSITE PELLETS PRODUCED BY SPARK PLASMA SINTERING AND HOT PRESSING},
journal = {Journal of Surface Engineering and Coating Technology},
year = {2026},
doi = {10.66310/swhc3599}
}
EUVIMED