EUVIMEDPoznaj EUVIMED
Open access · CC BY 4.0

STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS

Aidar Kenesbekov, Askar Rahimberdinov, Temirlan Kusainov, Limara Karibayeva

Journal of Surface Engineering and Coating Technology · 2026-06-24 · 101

DOI: 10.66310/jpbs3543 ↗

At a glance

Journal article in Journal of Surface Engineering and Coating Technology, published online on 2026-06-24. Written by Aidar Kenesbekov and 3 co-authors. 14 references. The full text is freely available (open access, CC BY 4.0).

AbstraktDane bibliograficzneCiteRelated studies

Abstract (original language)

This study presents a comprehensive investigation of the effect of plastic deformation on the microstructure, mechanical, tribological, and corrosion properties of an iron-containing alloy produced by the electroslag remelting (ESR) process. The study focused on two states of the material: as-cast after ESR and deformed after subsequent rolling (ESR-R). Using X-ray fluorescence and X-ray diffraction analysis, as well as electron microscopy, the characteristics of the alloy’s phase composition and microstructure were determined. It was shown that plastic deformation leads to grain refinement, an increase in defect density, and the formation of secondary phases. A significant increase in the microhardness and wear resistance of the material after rolling was observed, accompanied by a decrease in the coefficient of friction. At the same time, an incяrease in corrosion current density and corrosion rate was observed, despite a shift of the corrosion potential toward a more positive region. The results obtained i

Cite

APA

Kenesbekov, A., Rahimberdinov, A., Kusainov, T., & Karibayeva, L. (2026). STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS. Journal of Surface Engineering and Coating Technology, 101. https://doi.org/10.66310/jpbs3543

Vancouver

Kenesbekov A, Rahimberdinov A, Kusainov T, Karibayeva L. STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS. Journal of Surface Engineering and Coating Technology. 2026:101. doi:10.66310/jpbs3543

BibTeX
@article{Kenesbekov2026,
  author = {Kenesbekov, Aidar and Rahimberdinov, Askar and Kusainov, Temirlan and Karibayeva, Limara},
  title = {STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  pages = {101},
  doi = {10.66310/jpbs3543}
}
Start for free →