EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS

Aidar Kenesbekov, Askar Rahimberdinov, Temirlan Kusainov, Limara Karibayeva

Journal of Surface Engineering and Coating Technology · 24.06.2026 · 101

DOI: 10.66310/jpbs3543 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, online erschienen am 24.06.2026. Verfasst von Aidar Kenesbekov und 3 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comprehensive investigation of the effect of plastic deformation on the microstructure, mechanical, tribological, and corrosion properties of an iron-containing alloy produced by the electroslag remelting (ESR) process. The study focused on two states of the material: as-cast after ESR and deformed after subsequent rolling (ESR-R). Using X-ray fluorescence and X-ray diffraction analysis, as well as electron microscopy, the characteristics of the alloy’s phase composition and microstructure were determined. It was shown that plastic deformation leads to grain refinement, an increase in defect density, and the formation of secondary phases. A significant increase in the microhardness and wear resistance of the material after rolling was observed, accompanied by a decrease in the coefficient of friction. At the same time, an incяrease in corrosion current density and corrosion rate was observed, despite a shift of the corrosion potential toward a more positive region. The results obtained i

Zitieren

APA

Kenesbekov, A., Rahimberdinov, A., Kusainov, T., & Karibayeva, L. (2026). STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS. Journal of Surface Engineering and Coating Technology, 101. https://doi.org/10.66310/jpbs3543

Vancouver

Kenesbekov A, Rahimberdinov A, Kusainov T, Karibayeva L. STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS. Journal of Surface Engineering and Coating Technology. 2026:101. doi:10.66310/jpbs3543

BibTeX
@article{Kenesbekov2026,
  author = {Kenesbekov, Aidar and Rahimberdinov, Askar and Kusainov, Temirlan and Karibayeva, Limara},
  title = {STUDY OF THE STRUCTURE AND PROPERTIES OF ALLOYS OBTAINED BY ELECTROSLAG REMELTING OF STEEL SCRAP ALLOYED WITH CARBIDE-FORMING ELEMENTS},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  pages = {101},
  doi = {10.66310/jpbs3543}
}
Kostenlos starten →