EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING

Aiym Nabioldina, Balym Alibekova, Garip Erdogan, Aibek Alibekov

Journal of Surface Engineering and Coating Technology · 2026-02-09 · 13

DOI: 10.66310/cfzl5511 ↗

At a glance

Journal article in Journal of Surface Engineering and Coating Technology, published online on 2026-02-09. Written by Aiym Nabioldina and 3 co-authors. 18 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This work presents the results of a study of multilayer metal-ceramic coatings based on the NiCr/NiCr-Al2O3/ Al2O3 system obtained by detonation spraying. Coatings with different numbers of layers were obtained: three-layer (NiCr, 50% NiCr - 50% Al2O3, Al2O3), five-layer (NiCr, 75% NiCr - 25% Al2O3, 50% NiCr - 50% Al2O3, 25% NiCr -75% Al2O3, Al2O3) and six-layer (NiCr, Al2O3, NiCr, Al2O3, NiCr, Al2O3). The study aims to establish the influence of layering and gradient distribution of components on the microstructural, phase, mechanical, and tribological characteristics of coatings. The microstructural features of the coatings were studied using scanning electron microscopy in backscattered electron (BSE) mode and energy dispersive spectral analysis (EDS). The phase composition was analyzed by X-ray phase analysis. Microhardness and surface roughness measurements were performed, as well as tribological tests at a temperature of 700 °C. It was found that five-layer coatings with a gradient structure with a gradual transition from a metal layer to a ceramic layer demonstrate the best performance characteristics among all the samples studied. The five-layer coatings were characterized by high microhardness, uniform surface roughness, minimal counterbody penetration depth, and a stable friction coefficient in wear tests.

Cite

APA

Nabioldina, A., Alibekova, B., Erdogan, G., & Alibekov, A. (2026). THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING. Journal of Surface Engineering and Coating Technology, 13. https://doi.org/10.66310/cfzl5511

Vancouver

Nabioldina A, Alibekova B, Erdogan G, Alibekov A. THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING. Journal of Surface Engineering and Coating Technology. 2026:13. doi:10.66310/cfzl5511

BibTeX
@article{Nabioldina2026,
  author = {Nabioldina, Aiym and Alibekova, Balym and Erdogan, Garip and Alibekov, Aibek},
  title = {THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  pages = {13},
  doi = {10.66310/cfzl5511}
}
Start for free →