EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING

Aiym Nabioldina, Balym Alibekova, Garip Erdogan, Aibek Alibekov

Journal of Surface Engineering and Coating Technology · 09.02.2026 · 13

DOI: 10.66310/cfzl5511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, online erschienen am 09.02.2026. Verfasst von Aiym Nabioldina und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents the results of a study of multilayer metal-ceramic coatings based on the NiCr/NiCr-Al2O3/ Al2O3 system obtained by detonation spraying. Coatings with different numbers of layers were obtained: three-layer (NiCr, 50% NiCr - 50% Al2O3, Al2O3), five-layer (NiCr, 75% NiCr - 25% Al2O3, 50% NiCr - 50% Al2O3, 25% NiCr -75% Al2O3, Al2O3) and six-layer (NiCr, Al2O3, NiCr, Al2O3, NiCr, Al2O3). The study aims to establish the influence of layering and gradient distribution of components on the microstructural, phase, mechanical, and tribological characteristics of coatings. The microstructural features of the coatings were studied using scanning electron microscopy in backscattered electron (BSE) mode and energy dispersive spectral analysis (EDS). The phase composition was analyzed by X-ray phase analysis. Microhardness and surface roughness measurements were performed, as well as tribological tests at a temperature of 700 °C. It was found that five-layer coatings with a gradient structure with a gradual transition from a metal layer to a ceramic layer demonstrate the best performance characteristics among all the samples studied. The five-layer coatings were characterized by high microhardness, uniform surface roughness, minimal counterbody penetration depth, and a stable friction coefficient in wear tests.

Zitieren

APA

Nabioldina, A., Alibekova, B., Erdogan, G., & Alibekov, A. (2026). THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING. Journal of Surface Engineering and Coating Technology, 13. https://doi.org/10.66310/cfzl5511

Vancouver

Nabioldina A, Alibekova B, Erdogan G, Alibekov A. THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING. Journal of Surface Engineering and Coating Technology. 2026:13. doi:10.66310/cfzl5511

BibTeX
@article{Nabioldina2026,
  author = {Nabioldina, Aiym and Alibekova, Balym and Erdogan, Garip and Alibekov, Aibek},
  title = {THE EFFECT OF LAYERING ON THE PROPERTIES OF METAL-CERAMIC COATINGS OBTAINED BY DETONATION SPRAYING},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  pages = {13},
  doi = {10.66310/cfzl5511}
}
Kostenlos starten →