Design and Experimental Validation of an EMI Filter for Military DC-DC Converters Achieving MIL-STD-461G CE102 Compliance
Journal of Defence and Security Industries: Strategy and Technology · 26.06.2026 · 1 (2) · 157-177
DOI: 10.65834/jdsi.12.64 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Defence and Security Industries: Strategy and Technology, online erschienen am 26.06.2026. Verfasst von İsmail Ovalı und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This paper presents the design, implementation, and experimental validation of a practical electromagnetic interference (EMI) filter developed for military DC-DC converter applications in order to satisfy the conducted emission limits defined by MIL-STD-461G CE102. High-frequency switching behavior, fast voltage and current transitions, and unavoidable parasitic elements in DC-DC converters make compliance with these limits extremely challenging without dedicated filtering, while practical military platforms impose severe constraints on size, stability, and realizability. In this paper, a systematic and iterative design methodology based on established EMI filter design principles is proposed, and the resulting attenuation performance is experimentally validated through CE102 measurements. The procedure includes determination of the design resistance considering the negative incremental impedance of the converter, design of differential-mode and common-mode stages, and suppression of resonance through properly selected damping networks. The resulting filter is implemented using commercially available components on a compact printed circuit board (PCB) compatible with practical military installations. The performance of the proposed filter is verified experimentally through CE102 measurements performed under identical operating conditions for both filtered and unfiltered cases. The unfiltered converter is shown to exceed the CE102 limits, whereas the filtered configuration achieves compliance with sufficient margin across the entire frequency range. In addition, frequency-domain attenuation characteristics are measured using a Bode analyzer to reveal the insertion loss behavior of the filter. The consistency between analytical expectations, attenuation measurements, and compliance tests demonstrates that the proposed approach provides a reliable, repeatable, and application-oriented framework for EMI filter design in military power electronic systems.
Zitieren
APA
Ovalı, İ., & İskender, İ. (2026). Design and Experimental Validation of an EMI Filter for Military DC-DC Converters Achieving MIL-STD-461G CE102 Compliance. Journal of Defence and Security Industries: Strategy and Technology, 1(2), 157-177. https://doi.org/10.65834/jdsi.12.64
Vancouver
Ovalı İ, İskender İ. Design and Experimental Validation of an EMI Filter for Military DC-DC Converters Achieving MIL-STD-461G CE102 Compliance. Journal of Defence and Security Industries: Strategy and Technology. 2026;1(2):157-177. doi:10.65834/jdsi.12.64
BibTeX
@article{Oval2026,
author = {Ovalı, İsmail and İskender, İres},
title = {Design and Experimental Validation of an EMI Filter for Military DC-DC Converters Achieving MIL-STD-461G CE102 Compliance},
journal = {Journal of Defence and Security Industries: Strategy and Technology},
year = {2026},
volume = {1},
number = {2},
pages = {157--177},
doi = {10.65834/jdsi.12.64}
}
EUVIMED