Thermal Performance Analysis of Heat Exchangers Using Nanofluids for Energy-Efficient Applications
International Journal on Theoretical and Applied Research in Mechanical Engineering · 2022
DOI: 10.65521/ijtarme.v11i1.4424 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal on Theoretical and Applied Research in Mechanical Engineering, 2022. Verfasst von Behruz Kalimuthu.
Abstract (Originalsprache)
Heat exchangers are central to energy conversion, refrigeration, process industries, power systems and waste-heat recovery, yet their efficiency is constrained by the limited thermal conductivity of conventional working fluids. This methodology paper develops a reproducible framework for evaluating the thermal and hydraulic performance of a counter-flow double-pipe heat exchanger operated with Al2O3-water nanofluids. The proposed study varies nanoparticle volume concentration from 0 to 2.0% and Reynolds number from 6,000 to 14,000 while controlling hot- and cold-stream inlet conditions. Effective density, specific heat, viscosity and thermal conductivity are determined from standard mixture models, and exchanger performance is evaluated through heat-transfer rate, log-mean temperature difference, overall and convective heat-transfer coefficients, Nusselt number, pressure drop, pumping power and a thermal performance evaluation criterion. A literature-informed, model-based results section is included to demonstrate the analysis workflow without presenting unperformed laboratory measurements as experimental facts. At Re = 10,000, the conservative single-phase model predicts that increasing Al2O3 concentration to 2.0 vol.% raises the convective heat-transfer coefficient by about 3.0% while pressure drop rises by about 4.4%, producing a performance criterion slightly above unity. The analysis indicates that low-to-moderate nanoparticle concentrations can provide a positive thermal-hydraulic balance, but practical energy savings depend on dispersion stability, viscosity, pumping power and heat-exchanger geometry. The methodology can be used as a basis for laboratory validation and for comparing different nanoparticle/base-fluid combinations in energy-efficient thermal systems.
Zitieren
APA
Kalimuthu, B. (2022). Thermal Performance Analysis of Heat Exchangers Using Nanofluids for Energy-Efficient Applications. International Journal on Theoretical and Applied Research in Mechanical Engineering. https://doi.org/10.65521/ijtarme.v11i1.4424
Vancouver
Kalimuthu B. Thermal Performance Analysis of Heat Exchangers Using Nanofluids for Energy-Efficient Applications. International Journal on Theoretical and Applied Research in Mechanical Engineering. 2022. doi:10.65521/ijtarme.v11i1.4424
BibTeX
@article{Kalimuthu2022,
author = {Kalimuthu, Behruz},
title = {Thermal Performance Analysis of Heat Exchangers Using Nanofluids for Energy-Efficient Applications},
journal = {International Journal on Theoretical and Applied Research in Mechanical Engineering},
year = {2022},
doi = {10.65521/ijtarme.v11i1.4424}
}
EUVIMED