EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Transfer Enhancement in Industrial Heat Exchangers Using Graphene Oxide Nanofluids

Omid Khouri, Hamid Reza Goshayeshi, Seyed Borhan Mousavi iD, Shamin Hosseini Nami, Saeed Zeinali Heris

ACS Omega · 04.06.2024 · 9 (22) · 24025-24038

DOI: 10.1021/acsomega.4c02581 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 24.05.2024. Verfasst von Omid Khouri und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Mashhad Branch, Islamic Azad University, Mashhad 19585-466, Iran. Die Arbeit wurde bisher 52-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the heat transfer characteristics within the heat exchanger using water-based GO nanofluids were comprehensively assessed. An apparatus was constructed by scaling down an industrial heat exchanger. The nanofluid's thermal conductivity, specific heat capacity, viscosity, density, Prandtl number, and Nusselt number were examined at varying temperatures and GO nanoparticle concentrations. The results revealed that the thermal conductivity of the nanofluid increased with both temperature and nanoparticle concentration, reaching a peak value of 0.380 W m-1 K-1 at 85 °C and 0.1 wt %, leading to enhanced heat transfer rates through conduction and convection mechanisms. The specific heat capacity increased with temperature but decreased with higher GO nanoparticle contents with a maximum value of 3403.821 J kg-1 K-1 recorded at 40 °C and 0.01 wt %. The viscosity of the nanofluid increased with higher concentrations of GO nanoparticles, and the minimum value of 0.83 mPa s was observed at 85 °C and 0.01 wt %. The Prandtl number decreased with the temperature but increased with increasing GO nanoparticle concentration, suggesting a transition from convective to conductive heat transfer. A newly derived correlation equation for the Nusselt number, Nu = 0.0059(1 + 7.62ϕ0.6886)Pe 0.001 Re 0.9238 Pr 0.4, allows predicting heat transfer enhancement in nanofluids. The findings emphasize the potential of nanofluids for improving heat exchanger performance and offer valuable insights into optimizing nanofluid applications in thermal systems.

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Mashhad Branch, Islamic Azad University, Mashhad 19585-466, Iran.
  • J. Mike Walker '66 Mechanical Engineering Department, Texas A&M University, College Station, Texas 77843, United States.
  • School of Chemical, Biological and Materials Engineering, The University of Oklahoma, Norman, Oklahoma 73019, United States.
  • School of Safety Science & Engineering, Xi'an University of Science and Technology, 58, Yanta Mid. Rd., Xi'an, Shaanxi 710054, China.
  • Faculty of Chemical and Petroleum Engineering, University of Tabriz, Tabriz 51666-16471, Iran.

ORCID-Profile: Seyed Borhan Mousavi

Zitieren

APA

Khouri, O., Goshayeshi, H. R., Mousavi, S. B., Hosseini Nami, S., & Zeinali Heris, S. (2024). Heat Transfer Enhancement in Industrial Heat Exchangers Using Graphene Oxide Nanofluids. ACS Omega, 9(22), 24025-24038. https://doi.org/10.1021/acsomega.4c02581

Vancouver

Khouri O, Goshayeshi HR, Mousavi SB, Hosseini Nami S, Zeinali Heris S. Heat Transfer Enhancement in Industrial Heat Exchangers Using Graphene Oxide Nanofluids. ACS Omega. 2024;9(22):24025-24038. doi:10.1021/acsomega.4c02581

BibTeX
@article{Khouri2024,
  author = {Khouri, Omid and Goshayeshi, Hamid Reza and Mousavi, Seyed Borhan and Hosseini Nami, Shamin and Zeinali Heris, Saeed},
  title = {Heat Transfer Enhancement in Industrial Heat Exchangers Using Graphene Oxide Nanofluids},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {22},
  pages = {24025--24038},
  doi = {10.1021/acsomega.4c02581}
}
Kostenlos starten →