EUVIMEDEUVIMED entdecken
Crossref

Flow Analysis of Car AC Duct to Find Temperature, VelocityandPressure Difference

Prof. Sourabh C. Hingne, Prof. Shraddha A Sonone, Prof.Robin R. Gupta, Prof. Bablu.N. Guldhe, Prof. Dhananjay A. Deshpande, Prof. Akshay R. Khadase

International Journal of Advanced Scientific Research and Engineering Trends · 30.11.2025 · 9 (11) · 59-62

DOI: 10.65521/ijasret.v9i11.1392 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Advanced Scientific Research and Engineering Trends, online erschienen am 30.11.2025. Verfasst von Prof. Sourabh C. Hingne und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Car AC ducts are consisting of two types of cross sections, rectangular and circular. Their performance alsovarieswiththetype of duct used. In most of the cases sharp turnings are avoided so as to avoid direct contact with duct inner surface. At someplacestheconditioned air flow also regulated with the help of duct wings. These types of conditions affect the performance of the duct. RectangularAC duct is commonly used and well-known type of ducting system which is implemented for the transport of conditionedair. Thesearecost effective and sophisticated ducting systems. At many places we find the cross section of duct decreases gradually whichmayaffectthe air flow inside the duct. It may be done intentionally to control flow inside the duct. But if it is not, then the study of their effectsonthe flow must be done. Hence it is found that the study of air behavior in AC duct is very important to know the nature of air flowin duct. Thereareseveralmethods are available to simulate air flow in AC duct. But the CFD analysis method is one of the best and simple methodwhichgivesusmore approximate results. In this project CFD analysis of Car AC duct is performed for efficiency test. Pressure, velocity and temperature counters canexplainthechange in behavior of flow. Also coated duct is analyzed with CFD tool. Further conclusion will be drawn according to resultsobtained.Keywords: CFD Tool, AC Duct

Zitieren

APA

Hingne, P. S. C., Sonone, P. S. A., Gupta, P. R., Guldhe, P. B., Deshpande, P. D. A., & Khadase, P. A. R. (2025). Flow Analysis of Car AC Duct to Find Temperature, VelocityandPressure Difference. International Journal of Advanced Scientific Research and Engineering Trends, 9(11), 59-62. https://doi.org/10.65521/ijasret.v9i11.1392

Vancouver

Hingne PSC, Sonone PSA, Gupta PR, Guldhe PB, Deshpande PDA, Khadase PAR. Flow Analysis of Car AC Duct to Find Temperature, VelocityandPressure Difference. International Journal of Advanced Scientific Research and Engineering Trends. 2025;9(11):59-62. doi:10.65521/ijasret.v9i11.1392

BibTeX
@article{Hingne2025,
  author = {Hingne, Prof. Sourabh C. and Sonone, Prof. Shraddha A and Gupta, Prof.Robin R. and Guldhe, Prof. Bablu.N. and Deshpande, Prof. Dhananjay A. and Khadase, Prof. Akshay R.},
  title = {Flow Analysis of Car AC Duct to Find Temperature, VelocityandPressure Difference},
  journal = {International Journal of Advanced Scientific Research and Engineering Trends},
  year = {2025},
  volume = {9},
  number = {11},
  pages = {59--62},
  doi = {10.65521/ijasret.v9i11.1392}
}
Kostenlos starten →