EUVIMEDEUVIMED entdecken
Crossref

Impact of Granulation Parameters on the Porosity and Disintegration Time of HPMC Granules Prepared by Fluidized Bed Technique

Hiba Hassan, Ali Zainalabbdeen . Asker

Dijlah Journal of Engineering Sciences ISSN: 3078-9664, e-ISSN: 3078-9656 · 17.06.2026 · 3 (2)

DOI: 10.65204/djes.v3i2.758 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Dijlah Journal of Engineering Sciences ISSN: 3078-9664, e-ISSN: 3078-9656, online erschienen am 17.06.2026. Verfasst von Hiba Hassan und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fluidized bed granulation is widely applied in several industrial sectors. The present study examines how key process parameters ( air flow rate, liquid-to-solid (L/S) ratio, granulation time, and feed mass) affect the porosity and disintegration time of (HPMC) granules. Experiments were carried out using A lab-scale, top-spray fluidized bed granulator and a full factorial experimental design was employed and analyzed both the individual and interactive effects of the selected variables. The findings show that an increase in feed mass resulted in higher bed porosity, while higher airflow rates tended to decrease porosity. The increased in feed mass likely promoted the formation of larger, less densely packed agglomeration. The L/S ratio and granulation time showed a major interactive effect, with higher levels promoting structural consolidation and reduced porosity. Disintegration time was primarily prolonged by higher L/S ratios, whereas increased granule porosity facilitated faster liquid penetration and shorter disintegration time.

Zitieren

APA

Hassan, H., & Asker, A. Z. (2026). Impact of Granulation Parameters on the Porosity and Disintegration Time of HPMC Granules Prepared by Fluidized Bed Technique. Dijlah Journal of Engineering Sciences ISSN: 3078-9664, e-ISSN: 3078-9656, 3(2). https://doi.org/10.65204/djes.v3i2.758

Vancouver

Hassan H, Asker AZ. Impact of Granulation Parameters on the Porosity and Disintegration Time of HPMC Granules Prepared by Fluidized Bed Technique. Dijlah Journal of Engineering Sciences ISSN: 3078-9664, e-ISSN: 3078-9656. 2026;3(2). doi:10.65204/djes.v3i2.758

BibTeX
@article{Hassan2026,
  author = {Hassan, Hiba and Asker, Ali Zainalabbdeen .},
  title = {Impact of Granulation Parameters on the Porosity and Disintegration Time of HPMC Granules Prepared by Fluidized Bed Technique},
  journal = {Dijlah Journal of Engineering Sciences ISSN: 3078-9664, e-ISSN: 3078-9656},
  year = {2026},
  volume = {3},
  number = {2},
  doi = {10.65204/djes.v3i2.758}
}
Kostenlos starten →