EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Ni-Cr on the Mechanical Properties, Machinability, Microstructure and Corrosion Behaviour of Al5Si3Cu Alloy

Omogbolade L. Adepitan, Olusegun Olufemi Ajide

Scientific Journal of Engineering Research · 21.06.2026 · 2 (4) · 438-455

DOI: 10.64539/sjer.v2i4.2026.470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Journal of Engineering Research, online erschienen am 21.06.2026. Verfasst von Omogbolade L. Adepitan und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study was designed to explore the effects of varying amounts of Nickel (Ni) and Chromium (Cr) on the mechanical, microstructural, corrosion, and machining properties of Al5Si3Cu alloy. Samples were prepared using a sand-casting method with Ni-Cr additions ranging from 2g to 10g, and analysed using spectroscopy, mechanical testing (hardness, tensile, impact, and compression), machinability evaluation, and wear testing via pin-on-disc. The evolved microstructure was observed using X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM), while corrosion resistance was investigated using potentiodynamic polarisation. The results revealed that Ni-Cr additions led to a complex balance of effects. While corrosion resistance improved at 8g Ni-Cr, mechanical strength and machinability declined due to the formation of brittle intermetallic compounds. Wear resistance was highest at 2g Ni-Cr but deteriorated with higher additions. At 10g Ni-Cr, corrosion resistance and overall performance declined due to oversaturation and microstructural defects. It was concluded that varying percentage of Ni-Cr has different effect on these properties of the ternary alloy. However, excessive alloying resulted in embrittlement and reduced performance. The findings emphasise the importance of precisely controlling Ni-Cr content in aluminium alloys to achieve a desirable balance of properties. Future research should focus on composition optimisation and understanding intermetallic behaviour.

Zitieren

APA

Adepitan, O. L., & Ajide, O. O. (2026). Effect of Ni-Cr on the Mechanical Properties, Machinability, Microstructure and Corrosion Behaviour of Al5Si3Cu Alloy. Scientific Journal of Engineering Research, 2(4), 438-455. https://doi.org/10.64539/sjer.v2i4.2026.470

Vancouver

Adepitan OL, Ajide OO. Effect of Ni-Cr on the Mechanical Properties, Machinability, Microstructure and Corrosion Behaviour of Al5Si3Cu Alloy. Scientific Journal of Engineering Research. 2026;2(4):438-455. doi:10.64539/sjer.v2i4.2026.470

BibTeX
@article{Adepitan2026,
  author = {Adepitan, Omogbolade L. and Ajide, Olusegun Olufemi},
  title = {Effect of Ni-Cr on the Mechanical Properties, Machinability, Microstructure and Corrosion Behaviour of Al5Si3Cu Alloy},
  journal = {Scientific Journal of Engineering Research},
  year = {2026},
  volume = {2},
  number = {4},
  pages = {438--455},
  doi = {10.64539/sjer.v2i4.2026.470}
}
Kostenlos starten →