EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cr on the Microstructure and Mechanical Properties of Cu-Ni-Si Alloys

Hu Wang, Wanyu Wang, Zhongping Chen

Materials · 29.03.2026 · 19 (7) · 1353

DOI: 10.3390/ma19071353 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.03.2026. Verfasst von Hu Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Chinalco Science and Technology Research Institute Co., Ltd., Beijing 102209, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chinalco Group Key Project, Henan Provincial Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A systematic study was conducted on the influence of Cr on the property evolution and precipitation behavior of Cu-Ni-Si alloys. Results indicate that Cu-Ni-Si alloys containing 0.33 at% Cr exhibit superior mechanical properties after three-stage cryogenic rolling and aging, achieving a tensile strength of up to 862 MPa. The addition of Cr induces competitive precipitation behavior between Cr and Ni for Si. It promotes the precipitation of Cr3Si phases at various scales while suppressing the formation of Ni3Si phases. Concurrently, it enhances the precipitation of fine nanoscale precipitation-hardening phases Ni2Si, optimizing the alloy’s precipitation hardening effect. Furthermore, the addition of Cr suppresses dislocation annihilation. The formation of finer precipitates pins the dislocations introduced during cryogenic rolling and impedes their motion, thereby enhancing the alloy’s strength and hardness. The alternating and staggered distribution of soft and hard microzones in the Cr-containing alloy results in more uniform overall properties of the sample. However, the reduced proportion of soft microzones slightly decreases the alloy’s electrical conductivity.

Schlagwörter

Stichwörter der Autor:innen

Cr additionCu-Ni-Si alloysoft and hard micro-zonesstrength

Autor:innen und Institutionen

  • Chinalco Science and Technology Research Institute Co., Ltd., Beijing 102209, China.

Förderung

  • Chinalco Group Key Project
  • Henan Provincial Key Research and Development Program

Zitieren

APA

Wang, H., Wang, W., & Chen, Z. (2026). Effect of Cr on the Microstructure and Mechanical Properties of Cu-Ni-Si Alloys. Materials, 19(7), 1353. https://doi.org/10.3390/ma19071353

Vancouver

Wang H, Wang W, Chen Z. Effect of Cr on the Microstructure and Mechanical Properties of Cu-Ni-Si Alloys. Materials. 2026;19(7):1353. doi:10.3390/ma19071353

BibTeX
@article{Wang2026,
  author = {Wang, Hu and Wang, Wanyu and Chen, Zhongping},
  title = {Effect of Cr on the Microstructure and Mechanical Properties of Cu-Ni-Si Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {7},
  pages = {1353},
  doi = {10.3390/ma19071353}
}
Kostenlos starten →