EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Analysis A finite Element Model of A torque Arm by Using Composite Materials

Mohamad Gabar, Ali Gebriel, Ali Musa, Aliaa Hassan, Wrida ALasefir

Tobruk University Journal of Engineering Sciences · 30.06.2021 · 2 (1) · 1-19

DOI: 10.64516/tujes.v2i1.57 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Tobruk University Journal of Engineering Sciences, online erschienen am 30.06.2021. Verfasst von Mohamad Gabar und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper was initially tasked with developing a composite torque arm by using finite element analysis by Abaqus software. A composite in engineering sense is any materials that have been physically assembled to form one single bulk without physical blending to foam a homogeneous material. The resulting material would still have components identifiable as the constituent of the different materials. One of the advantages of composite is that two or more materials could be combined to take advantage of the good characteristics of each of the materials. The main advantage of most composites materials are in the weight savings. A quick way to illustrate this advantage is in the strength to weight ratio. Different materials have different strength that is each material can take different of amount of load for the same volume (cross sectional area) of the material. So, the paper talks about creating a finite element model of a torque arm by using composite materials. Also, the software used is called Abaqus, that is a suite for finite element analysis to perform numerical modeling and analyses to evaluate the structural response and behavior of the torque arm. The use of composite materials for the torque arm may produce a good results in terms of costs, light weight, safety and durability.

Zitieren

APA

Gabar, M., Gebriel, A., Musa, A., Hassan, A., & ALasefir, W. (2021). Design and Analysis A finite Element Model of A torque Arm by Using Composite Materials. Tobruk University Journal of Engineering Sciences, 2(1), 1-19. https://doi.org/10.64516/tujes.v2i1.57

Vancouver

Gabar M, Gebriel A, Musa A, Hassan A, ALasefir W. Design and Analysis A finite Element Model of A torque Arm by Using Composite Materials. Tobruk University Journal of Engineering Sciences. 2021;2(1):1-19. doi:10.64516/tujes.v2i1.57

BibTeX
@article{Gabar2021,
  author = {Gabar, Mohamad and Gebriel, Ali and Musa, Ali and Hassan, Aliaa and ALasefir, Wrida},
  title = {Design and Analysis A finite Element Model of A torque Arm by Using Composite Materials},
  journal = {Tobruk University Journal of Engineering Sciences},
  year = {2021},
  volume = {2},
  number = {1},
  pages = {1--19},
  doi = {10.64516/tujes.v2i1.57}
}
Kostenlos starten →