EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Harmonic tubular bell design optimization using finite element analysis

Therese Malinowski, Noori Kim, Mark French

Acta Acustica · 2026 · 10 · 106

DOI: 10.1051/aacus/2026109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acta Acustica, online erschienen am 10.11.2026. Verfasst von Therese Malinowski und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ralph W. and Grace M. Showalter Research Trust Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The tubular bell chime is an orchestral percussion instrument with a naturally inharmonic frequency spectrum. Inharmonic overtones can decrease the perception of clear pitch but spectral tuning for perceptual optimization has not previously been explored for tubular bells. The method uses finite element analysis to solve the inverse spectral problem of designing a harmonic tubular bell, through optimizing locations of diameter reductions to minimize spectral frequency-matching errors with a harmonic series. An initial design was generated using constrained minimization within Timoshenko beam theory. Then, the design was refined using gradient descent of simulated three-dimensional finite element analysis. The final design was prototyped using a manual lathe, and experimentally characterized via frequency response measurements. Prior to modification, the stock material had overtones up to the fifth mode between 24 and 158 ¢ from a fundamental-based harmonic series. Following shape optimization, the first five resonant frequencies of the manufactured chime were between 3 and 12 ¢ away from the target harmonic series, showing a substantial perceptible increase in harmonicity. The results prove that applied local mass and stiffness changes can modally tune a tubular bell, unlocking novel timbral features for chime-type instruments.

Förderung

  • Ralph W. and Grace M. Showalter Research Trust Fund

Zitieren

APA

Malinowski, T., Kim, N., & French, M. (2026). Harmonic tubular bell design optimization using finite element analysis. Acta Acustica, 10, 106. https://doi.org/10.1051/aacus/2026109

Vancouver

Malinowski T, Kim N, French M. Harmonic tubular bell design optimization using finite element analysis. Acta Acustica. 2026;10:106. doi:10.1051/aacus/2026109

BibTeX
@article{Malinowski2026,
  author = {Malinowski, Therese and Kim, Noori and French, Mark},
  title = {Harmonic tubular bell design optimization using finite element analysis},
  journal = {Acta Acustica},
  year = {2026},
  volume = {10},
  pages = {106},
  doi = {10.1051/aacus/2026109}
}
Kostenlos starten →