EUVIMEDEUVIMED entdecken
Crossref

Numerical Analysis of Shear Force for Oblique Edge Die-cutting Shear Utilizing ANSYS LS-DYNA

Dongfang Li, Mingliang Zheng, Zengyang Huang, Wentao Fu, Haibin Lin, Sufen Wang

Metalurgija · 2025

DOI: 10.64486/m.65.2.1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metalurgija, 2025. Verfasst von Dongfang Li und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the development of an advanced finite element model for predicting shear forces during the oblique-edge punching of Q235B steel, a material widely used in industrial applications. The model, developed in ANSYS/LS-DYNA, investigates the influence of key parameters such as shear edge inclination, strip thickness, punching depth, and lateral clearance. Results indicate that peak shear forces decrease significantly as the shear edge inclination increases from 4.0° to 4.8°. Furthermore, the optimal lateral clearance is found to be between 0.2 mm and 0.4 mm, leading to improved tool performance and material integrity. Model validation shows an error range of 8.47 % to 10.87 %, confirming its accuracy and practical applicability. This study offers valuable insights for optimizing tool design and enhancing punching efficiency in industrial settings, particularly in cold rolling mills. Future work will extend the model to a broader range of materials, incorporate advanced tool geometries, and account for thermal effects, thereby deepening the understanding of the shearing process and enabling further improvements in tool performance.

Zitieren

APA

Li, D., Zheng, M., Huang, Z., Fu, W., Lin, H., & Wang, S. (2025). Numerical Analysis of Shear Force for Oblique Edge Die-cutting Shear Utilizing ANSYS LS-DYNA. Metalurgija. https://doi.org/10.64486/m.65.2.1

Vancouver

Li D, Zheng M, Huang Z, Fu W, Lin H, Wang S. Numerical Analysis of Shear Force for Oblique Edge Die-cutting Shear Utilizing ANSYS LS-DYNA. Metalurgija. 2025. doi:10.64486/m.65.2.1

BibTeX
@article{Li2025,
  author = {Li, Dongfang and Zheng, Mingliang and Huang, Zengyang and Fu, Wentao and Lin, Haibin and Wang, Sufen},
  title = {Numerical Analysis of Shear Force for Oblique Edge Die-cutting Shear Utilizing ANSYS LS-DYNA},
  journal = {Metalurgija},
  year = {2025},
  doi = {10.64486/m.65.2.1}
}
Kostenlos starten →