Comparative Evaluation of Cryogenic and Flood Cooling for Precision and Sustainable Machining of Inconel 718
Mechanical Theory and Systems · 2025
DOI: 10.64229/3ws4z636 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mechanical Theory and Systems, 2025. Verfasst von Prashant S. Jadhav und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the machinability of Inconel 718—a nickel-based superalloy widely used in aerospace, defence, and high-performance applications under conventional flood cooling and cryogenic cooling with liquid nitrogen (LN₂). Its low thermal conductivity, strain-hardening tendency, and abrasive microstructure make precision machining challenging. The effects of spindle speed, feed rate, and depth of cut were investigated using Taguchi’s L27 design on surface roughness (Ra), tool wear (TW), cutting forces (CF), power consumption (P), and machining noise (N). Cryogenic cooling outperformed flood cooling, reducing surface roughness and tool wear by up to 30%, lowering cutting forces and noise, and minimizing vibration and deflection. Chip morphology and economic analysis further confirmed its industrial feasibility, showing a 38% cost benefit due to reduced tool consumption and elimination of coolant disposal. Overall, cryogenic cooling enhances precision, dimensional control, energy efficiency, and sustainability, demonstrating strong potential for industrial adoption in applications demanding high accuracy and material performance.
Zitieren
APA
Jadhav, P. S., Magdum, R., Shirguppikar, S., & Salunkhe, R. V. (2025). Comparative Evaluation of Cryogenic and Flood Cooling for Precision and Sustainable Machining of Inconel 718. Mechanical Theory and Systems. https://doi.org/10.64229/3ws4z636
Vancouver
Jadhav PS, Magdum R, Shirguppikar S, Salunkhe RV. Comparative Evaluation of Cryogenic and Flood Cooling for Precision and Sustainable Machining of Inconel 718. Mechanical Theory and Systems. 2025. doi:10.64229/3ws4z636
BibTeX
@article{Jadhav2025,
author = {Jadhav, Prashant S. and Magdum, Rohit and Shirguppikar, Shailesh and Salunkhe, Ramadevi V.},
title = {Comparative Evaluation of Cryogenic and Flood Cooling for Precision and Sustainable Machining of Inconel 718},
journal = {Mechanical Theory and Systems},
year = {2025},
doi = {10.64229/3ws4z636}
}
EUVIMED