Comparative Analysis of Vibration Axis Effects on Ultrasonic Vibration-Assisted Machining of Inconel 718
Machines · 04.01.2026 · 14 (1) · 64
DOI: 10.3390/machines14010064 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 04.01.2026. Verfasst von Ramazan Hakkı Namlu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Scientific and Technological Research Council of Turkey.
Abstract (Originalsprache)
Inconel 718 is widely utilized in critical engineering sectors, particularly aerospace, owing to its exceptional creep resistance, corrosion resistance, and retention of mechanical strength at elevated temperatures. However, its high hardness, low thermal conductivity, and strong work-hardening tendency make it extremely difficult to machine using conventional techniques. Ultrasonic Vibration-Assisted Machining (UVAM) has emerged as an effective strategy to overcome these limitations by superimposing high-frequency, low-amplitude vibrations onto the cutting process. Depending on the vibration direction, UVAM can significantly change chip formation, tool–workpiece interaction, and surface integrity. In this study, the influence of three UVAM modes—longitudinal (Z-UVAM), feed-directional (X-UVAM), and multi-axial (XZ-UVAM)—on the machining behavior of Inconel 718 was systematically investigated. The findings reveal that XZ-UVAM provides the most advantageous outcomes, primarily due to its intermittent cutting mechanism. Compared with Conventional Machining (CM), XZ-UVAM reduced cutting forces by up to 43% and areal surface roughness by 37%, while generating surfaces with more uniform topographies and smaller peak-to-valley variations. Furthermore, UVAM enhanced subsurface microhardness as a result of the surface hammering effect, which may improve fatigue performance. XZ-UVAM also effectively minimized burr formation, demonstrating its potential for high-quality, sustainable, and efficient machining of Inconel 718.
Förderung
- The Scientific and Technological Research Council of Turkey
Zitieren
APA
Namlu, R. H., & Kılıç, Z. M. (2026). Comparative Analysis of Vibration Axis Effects on Ultrasonic Vibration-Assisted Machining of Inconel 718. Machines, 14(1), 64. https://doi.org/10.3390/machines14010064
Vancouver
Namlu RH, Kılıç ZM. Comparative Analysis of Vibration Axis Effects on Ultrasonic Vibration-Assisted Machining of Inconel 718. Machines. 2026;14(1):64. doi:10.3390/machines14010064
BibTeX
@article{Namlu2026,
author = {Namlu, Ramazan Hakkı and Kılıç, Zekai Murat},
title = {Comparative Analysis of Vibration Axis Effects on Ultrasonic Vibration-Assisted Machining of Inconel 718},
journal = {Machines},
year = {2026},
volume = {14},
number = {1},
pages = {64},
doi = {10.3390/machines14010064}
}
EUVIMED