EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Wearable Parkinson’s Tremor Monitoring Using a PNC Based Flexible Capacitive Sensor with an AC Bridge and Two-Step Calibration

Muzammil Khan, Faiza Ayyob

Frontiers in Engineering · 2025

DOI: 10.63313/fe.9002 ↗

At a glance

Journal article in Frontiers in Engineering, 2025. Written by Muzammil Khan and 1 co-authors. 36 references. The full text is freely available (open access, CC BY 4.0).

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Wearable monitoring of Parkinson’s Disease (PD) tremor demands sensors that combine high low-pressure sensitivity with readouts robust to lead and parasitic capacitances. We present a flexible Porous-Nanocomposite (PNC) capacitive pressure sensor that’s integrated into an Alternating Current (AC) De-Sauty bridge, along with a two-step calibration process that effectively cancels out lead and parasitic effects. This innovation allows for picofarad-level resolution in a wearable design. The device features a carbon nanotube (CNT)-doped po-rous dielectric paired with Ag/PI electrodes, and it utilizes a guarded bridge front end that connects to an instrumentation amplifier and Micro Controller Unit (MCU) equipped with an Analogue to Digital Converter (ADC). Onboard Digital Signal Processing (DSP) handles band-pass filtering (around 3-8 Hz) and Welch spectral estimation for detecting tremors. In our benchtop calibration and tests with consenting volunteers, the system demonstrated an absolute sen-sitivity of about 2.2pF·kPa⁻¹, with a detection limit close to 14-16 Pa, and it showed a reliable dynamic response within the 4-6 Hz tremor range while keeping baseline noise low and ensuring repeatability under cyclic loading. These findings highlight a compact, low-power solution ideal for continuous fingertip tremor monitoring, paving the way for further IRB-approved clinical validation to explore its potential for diagnosis, symptom tracking, and person-alized therapy assessment.

Cite

APA

Khan, M., & Ayyob, F. (2025). Wearable Parkinson’s Tremor Monitoring Using a PNC Based Flexible Capacitive Sensor with an AC Bridge and Two-Step Calibration. Frontiers in Engineering. https://doi.org/10.63313/fe.9002

Vancouver

Khan M, Ayyob F. Wearable Parkinson’s Tremor Monitoring Using a PNC Based Flexible Capacitive Sensor with an AC Bridge and Two-Step Calibration. Frontiers in Engineering. 2025. doi:10.63313/fe.9002

BibTeX
@article{Khan2025,
  author = {Khan, Muzammil and Ayyob, Faiza},
  title = {Wearable Parkinson’s Tremor Monitoring Using a PNC Based Flexible Capacitive Sensor with an AC Bridge and Two-Step Calibration},
  journal = {Frontiers in Engineering},
  year = {2025},
  doi = {10.63313/fe.9002}
}
Start for free →