EUVIMEDOpdag EUVIMED
Crossref

Optimization of Nozzle Air Pressure for Enhanced Quality and Efficiency in CVC Yarn Production using Murata Vortex Spinning

Elias Khalil

International Journal of Textile Engineering and Management · 2026-07-18 · 6

DOI: 10.63261/ijtem122 ↗

At a glance

Journal article in International Journal of Textile Engineering and Management, published online on 2026-07-18. Written by Elias Khalil.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study investigates the effect of air-nozzle pressure on the quality and production efficiency of 34 Ne CVC yarn composed of 60% cotton and 40% polyester, produced using a Murata Vortex Spinning 870 system. Four nozzle pressure levels, namely 0.45, 0.50, 0.55, and 0.60 MPa, were evaluated to determine their influence on yarn count, unevenness, tensile strength, hairiness, imperfections, waste generation, and energy consumption. The results show that nozzle pressure considerably affects yarn quality and operational performance. Among the tested pressure levels, 0.50 MPa produced the highest tenacity of 15.72 cN/tex and the lowest yarn unevenness of 10.25%, indicating superior yarn strength and regularity. Increasing the pressure further improved hairiness, with the hairiness index decreasing from 648 S3u/100 m at 0.45 MPa to 435 S3u/100 m at 0.60 MPa. However, higher pressure also increased total imperfections, mass variation, waste generation, and specific energy consumption. Total wastage increased from 3.10% at 0.45 MPa to 3.95% at 0.60 MPa, while specific energy consumption increased from 2.15 to 2.45 kWh/kg.

Cite

APA

Khalil, E. (2026). Optimization of Nozzle Air Pressure for Enhanced Quality and Efficiency in CVC Yarn Production using Murata Vortex Spinning. International Journal of Textile Engineering and Management, 6. https://doi.org/10.63261/ijtem122

Vancouver

Khalil E. Optimization of Nozzle Air Pressure for Enhanced Quality and Efficiency in CVC Yarn Production using Murata Vortex Spinning. International Journal of Textile Engineering and Management. 2026:6. doi:10.63261/ijtem122

BibTeX
@article{Khalil2026,
  author = {Khalil, Elias},
  title = {Optimization of Nozzle Air Pressure for Enhanced Quality and Efficiency in CVC Yarn Production using Murata Vortex Spinning},
  journal = {International Journal of Textile Engineering and Management},
  year = {2026},
  pages = {6},
  doi = {10.63261/ijtem122}
}
Start for free →