EUVIMEDSkopri EUVIMED
Crossref

Machine Learning–Based Predictive Quality Modeling for Defect Detection and Process Optimization in Advanced Manufacturing Systems

Asheke Mostofa

Review of Applied Science and Technology · 2023-12-01 · 13 (12) · 01-49

DOI: 10.63125/thy73b16 ↗

At a glance

Journal article in Review of Applied Science and Technology, published online on 2023-12-01. Written by Asheke Mostofa. Cited 8 times so far (Crossref).

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This study developed and quantitatively evaluated a machine learning–based predictive quality framework for defect detection, continuous quality estimation, and process optimization in advanced manufacturing systems. A quantitative experimental and longitudinal predictive-modeling design was applied to 12,480 manufacturing observations representing 3,120 production cycles, 6,240 manufactured components, 24 production batches, eight machines, and 18 synchronized sensor channels. Baseline manufacturing performance showed a 20.0% defect rate, 80.0% first-pass yield, 6.4% scrap rate, 13.6% rework rate, and process capability index of 1.18. Following preprocessing and feature selection, 186 candidate variables were reduced to 74 retained predictors, representing a 60.2% dimensionality reduction. Multiple classification and regression algorithms were evaluated using training, validation, cross-validation, and independent-test procedures. The ensemble classifier achieved the strongest defect-detection performance, with 96.4% accuracy, 94.1% precision, 92.8% sensitivity, 97.3% specificity, an F1-score of 0.934, and ROC-AUC of 0.982. Hybrid regression models explained 90.2%–94.1% of independent-test variation across major continuous quality characteristics. Tool wear was the strongest process-related predictor of defective production (adjusted OR = 2.84), while vibration magnitude was the strongest sensor-derived predictor (adjusted OR = 1.91). Multiobjective optimization reduced the experimentally observed defect rate from 20.0% to 8.3%, representing a 58.5% relative reduction, and increased first-pass yield to 91.7%. Surface roughness decreased by 31.0%, dimensional deviation by 37.7%, porosity by 41.0%, scrap by 57.8%, rework by 55.1%, downtime by 36.1%, and energy consumption by 12.3%. Process capability increased from 1.18 to 1.52, while overall equipment effectiveness increased from 72.8% to 84.6%. Manufacturing cost per unit decreased by 14.0%, and cost of poor quality declined by 54.0%. Principal baseline-to-optimized differences were statistically significant at p < .001 and were supported by moderate-to-large effect sizes. The findings demonstrated that integrating multisensor manufacturing data, machine learning, robust validation, and multiobjective optimization provided a quantitatively effective framework for improving defect detection, product quality, process stability, resource efficiency, and manufacturing performance.

Cite

APA

Mostofa, A. (2023). Machine Learning–Based Predictive Quality Modeling for Defect Detection and Process Optimization in Advanced Manufacturing Systems. Review of Applied Science and Technology, 13(12), 01-49. https://doi.org/10.63125/thy73b16

Vancouver

Mostofa A. Machine Learning–Based Predictive Quality Modeling for Defect Detection and Process Optimization in Advanced Manufacturing Systems. Review of Applied Science and Technology. 2023;13(12):01-49. doi:10.63125/thy73b16

BibTeX
@article{Mostofa2023,
  author = {Mostofa, Asheke},
  title = {Machine Learning–Based Predictive Quality Modeling for Defect Detection and Process Optimization in Advanced Manufacturing Systems},
  journal = {Review of Applied Science and Technology},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {01--49},
  doi = {10.63125/thy73b16}
}
Start for free →