EUVIMEDEUVIMED entdecken
Crossref

OPTIMIZATION OF SURFACE ROUGHNESS IN MILLING ALUMINUM 7075-T6 USING THE TAGUCHI METHOD

Furkan Genc, Ibrahim Dalmis

Journal of the Technical University of Gabrovo · 30.06.2026 · 72 (1) · 29-33

DOI: 10.62853/yznv3667 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Technical University of Gabrovo, online erschienen am 30.06.2026. Verfasst von Furkan Genc und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machining processes, particularly milling, play a critical role in achieving high-precision components in subtractive manufacturing. Surface roughness is a key indicator of surface quality, influencing mechanical performance, fatigue life, and assembly fit in industrial applications. This study utilizes the Taguchi method to optimize machining parameters - cutting speed, feed rate, and depth of cut - for minimizing surface roughness (Ra) during the milling of Aluminum 7075-T6 alloy, a material extensively employed in aerospace, automotive, and military sectors due to its high strength-to-weight ratio. Experimental trials were conducted using an L9 orthogonal array, with results analyzed through signal-to-noise (S/N) ratios, analysis of variance (ANOVA), and regression modeling. The findings reveal that feed rate exerts the most significant influence on Ra (50.75% contribution), followed by cutting speed (28.34%) and depth of cut (12.75%). Optimal parameters identified are a cutting speed of 430 m/min, feed rate of 500 mm/min, and depth of cut of 0.3 mm, yielding a predicted Ra of 0.08967 μm. These optimizations enhance manufacturing efficiency and component durability, providing practical insights for precision engineering.

Zitieren

APA

Genc, F., & Dalmis, I. (2026). OPTIMIZATION OF SURFACE ROUGHNESS IN MILLING ALUMINUM 7075-T6 USING THE TAGUCHI METHOD. Journal of the Technical University of Gabrovo, 72(1), 29-33. https://doi.org/10.62853/yznv3667

Vancouver

Genc F, Dalmis I. OPTIMIZATION OF SURFACE ROUGHNESS IN MILLING ALUMINUM 7075-T6 USING THE TAGUCHI METHOD. Journal of the Technical University of Gabrovo. 2026;72(1):29-33. doi:10.62853/yznv3667

BibTeX
@article{Genc2026,
  author = {Genc, Furkan and Dalmis, Ibrahim},
  title = {OPTIMIZATION OF SURFACE ROUGHNESS IN MILLING ALUMINUM 7075-T6 USING THE TAGUCHI METHOD},
  journal = {Journal of the Technical University of Gabrovo},
  year = {2026},
  volume = {72},
  number = {1},
  pages = {29--33},
  doi = {10.62853/yznv3667}
}
Kostenlos starten →