EUVIMEDEUVIMED entdecken
Crossref

Optimization of Turning Parameters for Aluminum 7075 Using the Taguchi Method: A Statistical Approach

Ashis Satapathy, Debasish Panda, Man Mohan Patnaik, Gouri Shankar Mohapatro

Materials Science Forum · 11.11.2026 · 1200 · 77-86

DOI: 10.4028/p-ryhma1 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 11.11.2026. Verfasst von Ashis Satapathy und 3 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on optimizing turning parameters for machining Aluminum 7075 using the Taguchi method. The effects of cutting speed, feed rate, and depth of cut on machining performance were investigated to improve surface finish and material removal rate (MRR). Experiments were conducted with cutting speeds of 200–240 mm/min, feed rates of 0.08–0.14 mm/rev, and depths of cut of 0.1–0.8 mm, while maintaining a constant machining time of 120 seconds. An L9 orthogonal array and ANOVA were used to analyze the influence of process parameters. The optimal conditions were a cutting speed of 240 mm/min, feed rate of 0.08 mm/rev, and depth of cut of 0.8 mm, resulting in a minimum surface roughness of 0.945 µm and improved machining efficiency.

Zitieren

APA

Satapathy, A., Panda, D., Patnaik, M. M., & Mohapatro, G. S. (2026). Optimization of Turning Parameters for Aluminum 7075 Using the Taguchi Method: A Statistical Approach. Materials Science Forum, 1200, 77-86. https://doi.org/10.4028/p-ryhma1

Vancouver

Satapathy A, Panda D, Patnaik MM, Mohapatro GS. Optimization of Turning Parameters for Aluminum 7075 Using the Taguchi Method: A Statistical Approach. Materials Science Forum. 2026;1200:77-86. doi:10.4028/p-ryhma1

BibTeX
@article{Satapathy2026,
  author = {Satapathy, Ashis and Panda, Debasish and Patnaik, Man Mohan and Mohapatro, Gouri Shankar},
  title = {Optimization of Turning Parameters for Aluminum 7075 Using the Taguchi Method: A Statistical Approach},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1200},
  pages = {77--86},
  doi = {10.4028/p-ryhma1}
}
Kostenlos starten →