EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behaviour of 7075-T6 Aluminium Alloy: Integrating Digital Image Correlation and Finite Element Analysis for Uniaxial and Biaxial Load Scenarios

Fatemeh Marashi, Mahmoud Chizari, Ogunjobi Kehinde Emmanuel, Richard Nwawe Tchadeu, Hossein Madani

Journal of Design Against Fatigue · 06.11.2024 · 2 (2) · 13-21

DOI: 10.62676/jdaf.2024.2.2.20 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Design Against Fatigue, online erschienen am 06.11.2024. Verfasst von Fatemeh Marashi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study is to investigate the mechanical properties of 7075-T6 Aluminium (Al) alloy under both uniaxial and biaxial loads. The study will be conducted using a combination of experimental and numerical methods. The experimental method used is the digital image correlation (DIC) technique, which was utilized to capture the deformation and strain fields of the material specimen under tensile test. A tensile machine was employed to apply uniaxial and biaxial loads on the sample. The strain and deformation distribution of the results was generated on the DIC and correlated software. The numerical method involved the use of a commercial finite element software to create a finite element model and simulate the mechanical behaviour of the material under the same loading conditions. The results obtained from the experimental and numerical methods were compared to validate the accuracy of the numerical model. The outcomes demonstrated that under uniaxial loading, localized necking and fracture were observed, while biaxial loading resulted in shear deformation and fracture. This research contributes to the development of more accurate models for predicting the mechanical behaviour of the model samples under different loading conditions.

Zitieren

APA

Marashi, F., Chizari, M., Emmanuel, O. K., Tchadeu, R. N., & Madani, H. (2024). Mechanical Behaviour of 7075-T6 Aluminium Alloy: Integrating Digital Image Correlation and Finite Element Analysis for Uniaxial and Biaxial Load Scenarios. Journal of Design Against Fatigue, 2(2), 13-21. https://doi.org/10.62676/jdaf.2024.2.2.20

Vancouver

Marashi F, Chizari M, Emmanuel OK, Tchadeu RN, Madani H. Mechanical Behaviour of 7075-T6 Aluminium Alloy: Integrating Digital Image Correlation and Finite Element Analysis for Uniaxial and Biaxial Load Scenarios. Journal of Design Against Fatigue. 2024;2(2):13-21. doi:10.62676/jdaf.2024.2.2.20

BibTeX
@article{Marashi2024,
  author = {Marashi, Fatemeh and Chizari, Mahmoud and Emmanuel, Ogunjobi Kehinde and Tchadeu, Richard Nwawe and Madani, Hossein},
  title = {Mechanical Behaviour of 7075-T6 Aluminium Alloy: Integrating Digital Image Correlation and Finite Element Analysis for Uniaxial and Biaxial Load Scenarios},
  journal = {Journal of Design Against Fatigue},
  year = {2024},
  volume = {2},
  number = {2},
  pages = {13--21},
  doi = {10.62676/jdaf.2024.2.2.20}
}
Kostenlos starten →