EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite element analysis and crashworthiness evaluation of a multi-stage aluminium alloy 6061-T6 impact attenuator for Formula SAE

Aditia Pratama, Zainal Abadi, Delima Yanti Sari, Wanda Afnison

Journal of Engineering Researcher and Lecturer · 27.07.2026 · 5 (2) · 95-109

DOI: 10.58712/jerel.v5i2.219 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Researcher and Lecturer, online erschienen am 27.07.2026. Verfasst von Aditia Pratama und 3 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Formula SAE regulations require every prototype vehicle to be equipped with an impact attenuator as a passive safety system capable of absorbing a minimum frontal impact energy of 7,350 J at an impact velocity of 7 m/s for a vehicle with a mass of approximately 300 kg. This study aims to design an impact attenuator that satisfies the Formula SAE requirements to improve vehicle crashworthiness. Three design variations were analyzed using Finite Element Analysis (FEA) with LS-DYNA to evaluate energy absorption, impact force, acceleration/deceleration, and displacement. The accuracy of the numerical model was validated using previously published experimental data before analyzing the effect of thickness variation in each stage of the impact attenuator. The simulation results show that the optimum design is capable of absorbing impact energy above the minimum requirement of 7,350 J, exhibits a high Crash Force Efficiency (CFE), produces acceleration within the prescribed safety limits, and provides controlled deformation during the impact process. The results indicate that the proposed impact attenuator design satisfies the Formula SAE safety requirements and has the potential to be applied to prototype vehicles to improve safety performance during frontal collisions.

Zitieren

APA

Pratama, A., Abadi, Z., Sari, D. Y., & Afnison, W. (2026). Finite element analysis and crashworthiness evaluation of a multi-stage aluminium alloy 6061-T6 impact attenuator for Formula SAE. Journal of Engineering Researcher and Lecturer, 5(2), 95-109. https://doi.org/10.58712/jerel.v5i2.219

Vancouver

Pratama A, Abadi Z, Sari DY, Afnison W. Finite element analysis and crashworthiness evaluation of a multi-stage aluminium alloy 6061-T6 impact attenuator for Formula SAE. Journal of Engineering Researcher and Lecturer. 2026;5(2):95-109. doi:10.58712/jerel.v5i2.219

BibTeX
@article{Pratama2026,
  author = {Pratama, Aditia and Abadi, Zainal and Sari, Delima Yanti and Afnison, Wanda},
  title = {Finite element analysis and crashworthiness evaluation of a multi-stage aluminium alloy 6061-T6 impact attenuator for Formula SAE},
  journal = {Journal of Engineering Researcher and Lecturer},
  year = {2026},
  volume = {5},
  number = {2},
  pages = {95--109},
  doi = {10.58712/jerel.v5i2.219}
}
Kostenlos starten →