Lightweight Hollow Block Production Using Recycled Expanded Polystyrene and Coconut Coir: An Experimental Assessment
CIRCULIZER: Journal of Circular Systems, Innovation, and Technology · 27.02.2026 · 1 (1) · 74-87
DOI: 10.62671/circulizer.v1i1.256 ↗Kurz gefasst
Fachartikel in der Zeitschrift CIRCULIZER: Journal of Circular Systems, Innovation, and Technology, online erschienen am 27.02.2026. Verfasst von Fahriza Fahriza und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The increasing accumulation of non-biodegradable polymer waste and agricultural residues has encouraged the exploration of alternative raw materials for lightweight construction products. This study experimentally investigates the feasibility of incorporating recycled expanded polystyrene (EPS) and coconut coir fiber into hollow concrete blocks as composite additives to reduce unit weight. Hollow blocks were produced using conventional cement–sand mixtures with partial volumetric substitution by EPS particles and the addition of coconut coir fiber at controlled proportions. The specimens were cast using standard molds and cured under ambient conditions prior to testing. The primary parameter evaluated was the unit weight of the blocks as an indicator of lightweight material potential. The results show a consistent reduction in unit weight with increasing EPS content, while the inclusion of coconut coir contributed to further weight modification and improved material integrity during demolding. The combined use of EPS waste and coir fiber produced hollow blocks with lower density compared with the control mixture, indicating their suitability for non-structural lightweight applications. However, the study is limited to physical characterization, and no mechanical strength or durability testing was conducted. Therefore, the findings should be interpreted as a preliminary material feasibility assessment. This work demonstrates a practical pathway for valorizing polymeric and lignocellulosic waste in cement-based products while contributing to the development of lower-weight masonry units for applications where load-bearing capacity is not the primary requirement.
Zitieren
APA
Fahriza, F., Saputra, D. S., Mislina, M., Afdhal, A., & Ramadhini, M. (2026). Lightweight Hollow Block Production Using Recycled Expanded Polystyrene and Coconut Coir: An Experimental Assessment. CIRCULIZER: Journal of Circular Systems, Innovation, and Technology, 1(1), 74-87. https://doi.org/10.62671/circulizer.v1i1.256
Vancouver
Fahriza F, Saputra DS, Mislina M, Afdhal A, Ramadhini M. Lightweight Hollow Block Production Using Recycled Expanded Polystyrene and Coconut Coir: An Experimental Assessment. CIRCULIZER: Journal of Circular Systems, Innovation, and Technology. 2026;1(1):74-87. doi:10.62671/circulizer.v1i1.256
BibTeX
@article{Fahriza2026,
author = {Fahriza, Fahriza and Saputra, Devi Satria and Mislina, Mislina and Afdhal, Afdhal and Ramadhini, Meraty},
title = {Lightweight Hollow Block Production Using Recycled Expanded Polystyrene and Coconut Coir: An Experimental Assessment},
journal = {CIRCULIZER: Journal of Circular Systems, Innovation, and Technology},
year = {2026},
volume = {1},
number = {1},
pages = {74--87},
doi = {10.62671/circulizer.v1i1.256}
}
EUVIMED