EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The influence of tannin on the improvement of adhesive properties of urea-formaldehyde resin

Tamara Tešić, Milica Rančić, Danica Bajuk Bogdanović, Ivana Gavrilović Grmuša

Zastita Materijala · 18.03.2025 · 66 (1) · 119-125

DOI: 10.62638/zasmat1140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Zastita Materijala, online erschienen am 18.03.2025. Verfasst von Tamara Tešić und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to examine the properties of urea-formaldehyde (UF) adhesive with the addition of tannin, to determine whether it is possible to obtain so-called, bio-adhesives for wood with better mechanical properties compared to commercial UF. Tannin-based UF resins, with four different concentrations of tannin (5, 10, 15, and 20%), were prepared, and adhesive properties were tested and compared with properties of pure UF. Testing of tensile shear strength showed that the addition of tannin in UF adhesive formulation significantly increases its performance compared to pure UF adhesive. It was found that tensile shear strength increased with increasing concentration of tannin, while UF-tannin adhesives with tannin concentrations of 15% and 20% showed higher tensile shear strength than the corresponding pure UF adhesive. Therefore, it can be concluded that tannin-based UF adhesive can be a good candidate for application as an environmentally-friendly wood adhesive due to improvement in terms of adhesive and mechanical properties.

Zitieren

APA

Tešić, T., Rančić, M., Bogdanović, D. B., & Grmuša, I. G. (2025). The influence of tannin on the improvement of adhesive properties of urea-formaldehyde resin. Zastita Materijala, 66(1), 119-125. https://doi.org/10.62638/zasmat1140

Vancouver

Tešić T, Rančić M, Bogdanović DB, Grmuša IG. The influence of tannin on the improvement of adhesive properties of urea-formaldehyde resin. Zastita Materijala. 2025;66(1):119-125. doi:10.62638/zasmat1140

BibTeX
@article{Tei2025,
  author = {Tešić, Tamara and Rančić, Milica and Bogdanović, Danica Bajuk and Grmuša, Ivana Gavrilović},
  title = {The influence of tannin on the improvement of adhesive properties of urea-formaldehyde resin},
  journal = {Zastita Materijala},
  year = {2025},
  volume = {66},
  number = {1},
  pages = {119--125},
  doi = {10.62638/zasmat1140}
}
Kostenlos starten →