EUVIMEDEUVIMED entdecken
Crossref

Development of High Strength, High Water Resistant, Low‐Formaldehyde Emission Urea‐Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites

Wei Tian, Hongyu Feng, Xiaoyi Wang, Weijie Wu, Shiyi Zeng, Yaqin Zhu, Jiangbo Wang, Yuhang Ye, Changtong Mei, Yuanqiang Liu, Lihua Lu, Shaohua Jiang und 1 weitere

Journal of Applied Polymer Science · 10.03.2025 · 142 (10)

DOI: 10.1002/app.56548 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 07.12.2024. Verfasst von Wei Tian und 12 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Urea–formaldehyde (UF) resin adhesive is one of the most widely applied in wood composite materials. However, it suffers from issues related to low water resistance and elevated levels of formaldehyde emission. In this study, polyamide–epichlorohydrin resin (PAE) was used as a modifier and crosslinking agent to prepare modified UF resin adhesives with high strength and water resistance using low molar ratio UF resin. The interaction between PAE, UF, and wood surface and the effect of PAE on the chemical structure, thermal stability, bonding strength, water resistance, adhesive layer characteristics, and formaldehyde emission of UF adhesive were studied. Compared with the pure UF adhesive, after adding 5% PAE, the dry bonding strength reached 1.405 MPa, which was 20.70% higher than that of the pure UF adhesive. At the same time, the wet bonding strength reached 1.188 MPa, which was increased by 33.33%. In addition, the formaldehyde emission of the prepared plywood was less than 1.5 mg/L, which met the E 1 standard. This work presents a novel approach to address the challenge of balancing water resistance and formaldehyde emissions in UF resin adhesives, expanding the industrial utilization of UF resin wood adhesives.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Tian, W., Feng, H., Wang, X., Wu, W., Zeng, S., Zhu, Y., Wang, J., Ye, Y., Mei, C., Liu, Y., Lu, L., Jiang, S., & Han, X. (2025). Development of High Strength, High Water Resistant, Low‐Formaldehyde Emission Urea‐Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites. Journal of Applied Polymer Science, 142(10). https://doi.org/10.1002/app.56548

Vancouver

Tian W, Feng H, Wang X, Wu W, Zeng S, Zhu Y, et al. Development of High Strength, High Water Resistant, Low‐Formaldehyde Emission Urea‐Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites. Journal of Applied Polymer Science. 2025;142(10). doi:10.1002/app.56548

BibTeX
@article{Tian2025,
  author = {Tian, Wei and Feng, Hongyu and Wang, Xiaoyi and Wu, Weijie and Zeng, Shiyi and Zhu, Yaqin and Wang, Jiangbo and Ye, Yuhang and Mei, Changtong and Liu, Yuanqiang and Lu, Lihua and Jiang, Shaohua and Han, Xiaoshuai},
  title = {Development of High Strength, High Water Resistant, Low‐Formaldehyde Emission Urea‐Formaldehyde Adhesive and Its Effect on the Properties of Wood Composites},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {10},
  doi = {10.1002/app.56548}
}
Kostenlos starten →