EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine

Robert D Crapnell, Iana V S Arantes, Jéssica R Camargo, Elena Bernalte, Matthew J Whittingham, Bruno C Janegitz, Thiago R L C Paixão, Craig E Banks

Microchimica Acta · 2024-02 · 191 (2)

DOI: 10.1007/s00604-023-06175-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Microchimica Acta, online erschienen am 15.01.2024. Verfasst von Robert D Crapnell und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Engineering, Manchester Metropolitan University, Chester Street, Manchester, M1 5GD, UK. Hauptthemen laut MEDLINE: Acetaminophen, Nanotubes, Carbon. Die Arbeit wurde bisher 53-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The combination of multi-walled carbon nanotubes (MWCNT) and carbon black (CB) is presented to produce a high-performance electrically conductive recycled additive manufacturing filament. The filament and subsequent additively manufactured electrodes were characterised by TGA, XPS, Raman, and SEM and showed excellent low-temperature flexibility. The MWCNT/CB filament exhibited an improved electrochemical performance compared to an identical in-house produced bespoke filament using only CB. A heterogeneous electrochemical rate constant, $${k}_{obs}^0$$ k obs 0 of 1.71 (± 0.19) × 10 −3 cm s −1 was obtained, showing an almost six times improvement over the commonly used commercial conductive CB/PLA. The filament was successfully tested for the simultaneous determination of acetaminophen and phenylephrine, producing linear ranges of 5–60 and 5–200 μM, sensitivities of 0.05 μA μM −1 and 0.14 μA μM −1 , and limits of detection of 0.04 μM and 0.38 μM, respectively. A print-at-home device is presented where a removable lid comprised of rPLA can be placed onto a drinking vessel and the working, counter, and reference components made from our bespoke MWCNT/CB filament. The print-at-home device was successfully used to determine both compounds within real pharmaceutical products, with recoveries between 87 and 120% over a range of three real samples. This work paves the way for fabricating new highly conductive filaments using a combination of carbon materials with different morphologies and physicochemical properties and their application to produce additively manufactured electrodes with greatly improved electrochemical performance. Graphical abstract

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AcetaminophenNanotubes, CarbonSootPhenylephrineElectrochemical Techniques

Stichwörter der Autor:innen

3D printingAcetaminophenAdditive manufacturingCarbon blackDifferential pulse voltammetryFilament productionMulti-walled carbon nanotubes (MWCNT)Phenylephrine

Substanzen

AcetaminophenNanotubes, CarbonSootPhenylephrine

Autor:innen und Institutionen

  • Faculty of Science and Engineering, Manchester Metropolitan University, Chester Street, Manchester, M1 5GD, UK.
  • Departmento de Química Fundamental, Instituto de Química, Universidade de São Paulo, São Paulo, SP, 05508-000, Brazil.
  • Laboratory of Sensors, Nanomedicine and Nanostructured Materials, Federal University of São Carlos, Araras, 13600-970, Brazil.
  • Faculty of Science and Engineering, Manchester Metropolitan University, Chester Street, Manchester, M1 5GD, UK. c.banks@mmu.ac.uk.

Zitieren

APA

Crapnell, R. D., Arantes, I. V. S., Camargo, J. R., Bernalte, E., Whittingham, M. J., Janegitz, B. C., Paixão, T. R. L. C., & Banks, C. E. (2024). Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine. Microchimica Acta, 191(2). https://doi.org/10.1007/s00604-023-06175-2

Vancouver

Crapnell RD, Arantes IVS, Camargo JR, Bernalte E, Whittingham MJ, Janegitz BC, et al. Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine. Microchimica Acta. 2024;191(2). doi:10.1007/s00604-023-06175-2

BibTeX
@article{Crapnell2024,
  author = {Crapnell, Robert D and Arantes, Iana V S and Camargo, Jéssica R and Bernalte, Elena and Whittingham, Matthew J and Janegitz, Bruno C and Paixão, Thiago R L C and Banks, Craig E},
  title = {Multi-walled carbon nanotubes/carbon black/rPLA for high-performance conductive additive manufacturing filament and the simultaneous detection of acetaminophen and phenylephrine},
  journal = {Microchimica Acta},
  year = {2024},
  volume = {191},
  number = {2},
  doi = {10.1007/s00604-023-06175-2}
}
Kostenlos starten →