EUVIMEDEUVIMED entdecken
Crossref

Comparative fractographic assessment of stiffness gain and strength retention in waste-cellulose-reinforced PLA composites

Kaan Bilge

Journal of Innovative Engineering and Natural Science · 30.07.2026 · 6 (2) · 611-625

DOI: 10.61112/jiens.1921609 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Innovative Engineering and Natural Science, online erschienen am 30.07.2026. Verfasst von Kaan Bilge. Die Arbeit nennt 68 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellulosic PLA composites are often evaluated mainly through stiffness increase, although stiffness alone does not show whether reinforcement produces useful strengthening or an embrittled crack path. This work presents a comparative failure-analysis study of two published waste-cellulose-fiber (WCF)/PLA systems processed by thermokinetic high-shear mixing and injection molding but based on different PLA grades and processing states. The common formulations of neat PLA, 10 wt.% WCF, 20 wt.% WCF, and 30 wt.% WCF are re-examined using tensile data, supplier datasheet context, and comparative SEM fractography. Both routes showed strong WCF-induced stiffening, but their strength responses diverged. In the 4043D-type route, 10, 20, and 30 wt.% WCF increased tensile modulus by approximately 45%, 68%, and 102%, respectively, while tensile strength increased by approximately 30%, 46%, and 56%. In the same sequence, strain at break changed by approximately +1%, −28%, and −37%. In the L130-type route, 10, 20, and 30 wt.% WCF increased tensile modules by approximately 43%, 83%, and 116%, respectively, but tensile strength remained below the neat-matrix value, decreasing by approximately 28%, 12%, and 7%. Strain at break also decreased by approximately 40%, 36%, and 36%. Fractography shows that this divergence corresponds to different failure styles: the 4043D-type route retains rougher fracture topography, matrix shearing, fibrillation, and deformation-accommodating debonding, whereas the L130-type route shows smoother lamellar regions, fiber-adjacent cracking, local fiber fracture, and broader block-like separation. The study therefore demonstrates that similar modulus gains across 10–30 wt.% WCF can arise from different fracture architectures. For WCF/PLA composites, processing history, matrix state, and fracture morphology should be reported together with tensile property changes to distinguish strengthening from stiffness-driven embrittlement.

Zitieren

APA

Bilge, K. (2026). Comparative fractographic assessment of stiffness gain and strength retention in waste-cellulose-reinforced PLA composites. Journal of Innovative Engineering and Natural Science, 6(2), 611-625. https://doi.org/10.61112/jiens.1921609

Vancouver

Bilge K. Comparative fractographic assessment of stiffness gain and strength retention in waste-cellulose-reinforced PLA composites. Journal of Innovative Engineering and Natural Science. 2026;6(2):611-625. doi:10.61112/jiens.1921609

BibTeX
@article{Bilge2026,
  author = {Bilge, Kaan},
  title = {Comparative fractographic assessment of stiffness gain and strength retention in waste-cellulose-reinforced PLA composites},
  journal = {Journal of Innovative Engineering and Natural Science},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {611--625},
  doi = {10.61112/jiens.1921609}
}
Kostenlos starten →