EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ginger peel waste cellulose, mimosa cinerea fiber: light weight application with sustainable PLA composites

Sumesh Keerthiveettil Ramakrishnan, Kavimani Vijayananth, Tatana Vackova

Polymer Bulletin · 2026-05 · 83 (5)

DOI: 10.1007/s00289-026-06306-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Bulletin, online erschienen am 04.02.2026. Verfasst von Sumesh Keerthiveettil Ramakrishnan und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Czech Technical University in Prague.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mimosa cinerea natural fiber (NFR), ginger waste filler (WF) was incorporated into a Poly(lactic acid) (PLA) matrix to enhance tensile strength (TS), reduce thickness swelling (TSW) property in a corrosive state. The X-ray diffraction (XRD) of WF revealed a 110 plane at 15.8° and a 200 plane at 22.6°, the Fourier-transform infrared spectroscopy (FTIR) identified peaks at 1085 cm − 1 and 1520 cm − 1 , confirming high cellulose content in treated WF. In the compression moulded PLA composites, TS increased from 47.55 to 55.71 MPa as NFR content rose from 15 to 25 wt% with a constant 5 wt% WF. Improved hydrogen bonding among hydroxyl groups in NFR and WF contributed to this enhancement. The better combination of NFR (25 wt%), WF (5 wt%), NaOH Surface treatment (ST) (9 wt%), fiber length (LF) (1 cm), and 190 °C, attained TS of 58.4 MPa, 22.1% higher than neat PLA matrix. The WF addition reduced voids between NFR and PLA, lowering TSW in corrosive environments. Surface treatment up to 9 wt% produced a cellulose-rich, rough surface that improved PLA-NFR interaction, enhancing compatibility and increasing both TSW and TS. The better results were identified with NFR (15 wt%), WF (5 wt%), ST (3 wt%), LF (3 cm), and 190 °C for minimizing TSW in the hybrid PLA composite with 0.3% under corrosive conditions.

Förderung

  • Czech Technical University in Prague

Zitieren

APA

Ramakrishnan, S. K., Vijayananth, K., & Vackova, T. (2026). Ginger peel waste cellulose, mimosa cinerea fiber: light weight application with sustainable PLA composites. Polymer Bulletin, 83(5). https://doi.org/10.1007/s00289-026-06306-8

Vancouver

Ramakrishnan SK, Vijayananth K, Vackova T. Ginger peel waste cellulose, mimosa cinerea fiber: light weight application with sustainable PLA composites. Polymer Bulletin. 2026;83(5). doi:10.1007/s00289-026-06306-8

BibTeX
@article{Ramakrishnan2026,
  author = {Ramakrishnan, Sumesh Keerthiveettil and Vijayananth, Kavimani and Vackova, Tatana},
  title = {Ginger peel waste cellulose, mimosa cinerea fiber: light weight application with sustainable PLA composites},
  journal = {Polymer Bulletin},
  year = {2026},
  volume = {83},
  number = {5},
  doi = {10.1007/s00289-026-06306-8}
}
Kostenlos starten →