EUVIMEDEUVIMED entdecken
Crossref

Analysis of Sickle Product Defects Using Statistical Process Control in a Welding MSME

Akbar Tawaqqal, Muhammad Rivaldi Harjian

International Journal of Integrated Science and Technology · 02.07.2026 · 4 (6) · 337-350

DOI: 10.59890/ijist.v4i6.14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Integrated Science and Technology, online erschienen am 02.07.2026. Verfasst von Akbar Tawaqqal und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quality control is a critical aspect for the sustainability and competitiveness of Micro, Small, and Medium Enterprises (MSMEs) in the manufacturing sector. This study aims to analyze product defects in sickle products manufactured by a welding MSME in Mataram City, West Nusa Tenggara, using the Statistical Process Control (SPC) method. A quantitative descriptive-analytical research approach was employed, with data collected through physical inspection and check sheet recording over 20 observation periods. A sample of 20 sickle units was drawn from each observation period, resulting in a total of 400 inspected units. Data analysis was conducted using four Statistical Process Control (SPC) tools : check sheet, Pareto diagram, p-control chart (p-chart), and cause-and-effect diagram (fishbone/Ishikawa). The results revealed that out of 400 inspected units, 32 defective units were identified, resulting in an overall defect rate of 8.00%. Based on the Pareto diagram analysis, the most dominant type of defect was Crack (43.75%), followed by Uneven Thickness (31.25%), and Dull Edge (25.00%). The p-control chart analysis indicated that all data points fell within the statistical control limits (CL = 0.0800; UCL = 0.2620; LCL = 0.0000), suggesting that the production process is in a state of statistical control. Nevertheless, the Defect Per Million Opportunities (DPMO) value of 26,666.7, equivalent to a sigma level of 3.43, indicates that process capability still requires substantial improvement. The fishbone diagram analysis identified defect-causing factors related to Man, Machine, Material, Method, and Environment, with the absence of a written Standard Operating Procedure (SOP) as the most fundamental contributing factor. This study recommends the implementation of a welding SOP, preventive machine maintenance, raw material standardization, operator training, and routine SPC monitoring as structured and continuous quality improvement measures.

Zitieren

APA

Tawaqqal, A., & Harjian, M. R. (2026). Analysis of Sickle Product Defects Using Statistical Process Control in a Welding MSME. International Journal of Integrated Science and Technology, 4(6), 337-350. https://doi.org/10.59890/ijist.v4i6.14

Vancouver

Tawaqqal A, Harjian MR. Analysis of Sickle Product Defects Using Statistical Process Control in a Welding MSME. International Journal of Integrated Science and Technology. 2026;4(6):337-350. doi:10.59890/ijist.v4i6.14

BibTeX
@article{Tawaqqal2026,
  author = {Tawaqqal, Akbar and Harjian, Muhammad Rivaldi},
  title = {Analysis of Sickle Product Defects Using Statistical Process Control in a Welding MSME},
  journal = {International Journal of Integrated Science and Technology},
  year = {2026},
  volume = {4},
  number = {6},
  pages = {337--350},
  doi = {10.59890/ijist.v4i6.14}
}
Kostenlos starten →