EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Quality Control Analysis of Product Defects Using Seven Tools Method & PDCA

Kenny Kenny, Handi Wilujeng Nugroho

Greeners: Journal of Green Engineering for Sustainability · 04.07.2026 · 3 (2) · 44-49

DOI: 10.63643/jges.v3i2.337 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Greeners: Journal of Green Engineering for Sustainability, online erschienen am 04.07.2026. Verfasst von Kenny Kenny und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyze and control the quality of Tank Cold Water OPP model products using the Seven Tools method and the PDCA cycle. Production defect data from June 2023 to April 2024 (15 observation periods) were analyzed using checksheets, histograms, P-control charts, scatter diagrams, Pareto diagrams, and fishbone diagrams. Results show that out of 2,143,806 total production units, 79,995 defective units were recorded, yielding an average defect rate of 3.73%. Based on the Pareto diagram, Foreign Material is the most dominant defect type at 55.51%, followed by Blackdot (30.34%) and Oily (14.15%). Fishbone diagram analysis identified four main root-cause categories: machine, environment, method, and personnel. Corrective action proposals were formulated using the 5W+1H framework, covering periodic machine maintenance, production area housekeeping, SOP updates, and structured operator training. This research is expected to serve as a reference to pursuit of zero defect production.

Zitieren

APA

Kenny, K., & Nugroho, H. W. (2026). Quality Control Analysis of Product Defects Using Seven Tools Method & PDCA. Greeners: Journal of Green Engineering for Sustainability, 3(2), 44-49. https://doi.org/10.63643/jges.v3i2.337

Vancouver

Kenny K, Nugroho HW. Quality Control Analysis of Product Defects Using Seven Tools Method & PDCA. Greeners: Journal of Green Engineering for Sustainability. 2026;3(2):44-49. doi:10.63643/jges.v3i2.337

BibTeX
@article{Kenny2026,
  author = {Kenny, Kenny and Nugroho, Handi Wilujeng},
  title = {Quality Control Analysis of Product Defects Using Seven Tools Method & PDCA},
  journal = {Greeners: Journal of Green Engineering for Sustainability},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {44--49},
  doi = {10.63643/jges.v3i2.337}
}
Kostenlos starten →