EUVIMEDEUVIMED entdecken
Crossref

Performance Evaluation of Hybrid Sandwich Panels Composed of Recycled Particleboard Cores and MDF Face Materials

Ahmet Dedeağaçlı, Ergün Güntekin

Ağaç ve Orman · 25.06.2026 · 7 (1) · 64-69

DOI: 10.59751/agacorman.1934403 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ağaç ve Orman, online erschienen am 25.06.2026. Verfasst von Ahmet Dedeağaçlı und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: This study was supported by The Scientific and Technological Research Council of Türkiye (TÜBİTAK) within the framework of the 2209-A University Students Resea….

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the recovery potential and reuse possibilities of waste particleboards. , Waste particleboards were used as sandwich cores through two different methods. In the first method, waste particleboards obtained from different sources were recycled by processing them through a chipping machine. The resulting chips were sieved and classified to ensure homogeneity in terms of size and shape. After the classification, the chips were dried to obtain homogeneous moisture content. The chips were then used in the production of single-layer particleboards bonded with urea-formaldehyde adhesive. The produced single-layer particleboards had a target density of 0.5 g/cm3, a thickness of 10 mm, and an adhesive content of 10 % based on oven dried weight of the dry chip amount. The surfaces of the produced single-layer particleboards were bonded to 4 mm thick MDF boards using PVA adhesive, and sandwich boards were produced by cold pressing. In the second method, used particleboard was cut into 10 mm wide strips and used directly as sandwich panel cores. The face materials and adhesive in this method were the same as those used in the first method. The resulting sandwich materials were conditioned at 65% humidity and 21 °C. Test specimens were cut from the sandwich panels and evaluated for density, thickness swelling, and bending properties. The modulus of elasticity and bending strength values of sandwich panels ranged from 1861 to 2974 N/mm2, and 16.90 to 26.75 N/mm2, respectively. The sandwich panels manufactured using second method yielded thickness swelling values lower than 15%. The results of the study showed that waste particleboard can be successfully reused in sandwich panel production.

Förderung

  • This study was supported by The Scientific and Technological Research Council of Türkiye (TÜBİTAK) within the framework of the 2209-A University Students Resea…

Zitieren

APA

Dedeağaçlı, A., & Güntekin, E. (2026). Performance Evaluation of Hybrid Sandwich Panels Composed of Recycled Particleboard Cores and MDF Face Materials. Ağaç ve Orman, 7(1), 64-69. https://doi.org/10.59751/agacorman.1934403

Vancouver

Dedeağaçlı A, Güntekin E. Performance Evaluation of Hybrid Sandwich Panels Composed of Recycled Particleboard Cores and MDF Face Materials. Ağaç ve Orman. 2026;7(1):64-69. doi:10.59751/agacorman.1934403

BibTeX
@article{Dedeaal2026,
  author = {Dedeağaçlı, Ahmet and Güntekin, Ergün},
  title = {Performance Evaluation of Hybrid Sandwich Panels Composed of Recycled Particleboard Cores and MDF Face Materials},
  journal = {Ağaç ve Orman},
  year = {2026},
  volume = {7},
  number = {1},
  pages = {64--69},
  doi = {10.59751/agacorman.1934403}
}
Kostenlos starten →