EUVIMEDEUVIMED entdecken
Crossref

Manufacturing and Performance of Particleboards Incorporating Recycled MDF and Particleboard Particles

Grzegorz Kowaluk, Aleksandra Kowalczuk

Annals of WULS, Forestry and Wood Technology · 31.03.2026 · 133 · 5-21

DOI: 10.5604/01.3001.0055.8283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of WULS, Forestry and Wood Technology, erschienen am 31.03.2026. Verfasst von Grzegorz Kowaluk und 1 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manufacturing and Performance of Particleboards Incorporating Recycled MDF and Particleboard Particles. The objective of this study was to evaluate the feasibility of manufacturing three-layer particleboards using particles obtained by mechanical grinding and sorting of post-consumer and post-industrial MDF and particleboard. Experimental boards with a thickness of 16 mm and a target density of 700 kg/m were produced. Recycled MDF particles were incorporated into both face and core layers at mass shares of 0%, 5%, 10%, 25%, 50%, 75%, 90%, 95%, and 100%, replacing particles derived from recycled particleboard. Particleboard and MDF were milled using a laboratory knife mill. After sorting, the dimension range of particles in the core layers was 0.25÷2 mm and in the face layers 2÷8 mm. In these mixtures, fractions less than 0.25 mm were separated and excluded. Mechanical properties (MOR, MOE, IB, SWR) as well as physical properties (thickness swelling, water absorption, and density profile) were evaluated, along with formaldehyde and TVOC emissions. The results indicated that incorporating rMDF at approximately 25% may improve selected mechanical properties, whereas higher levels reduce internal bond strength and overall mechanical performance of the boards.

Zitieren

APA

Kowaluk, G., & Kowalczuk, A. (2026). Manufacturing and Performance of Particleboards Incorporating Recycled MDF and Particleboard Particles. Annals of WULS, Forestry and Wood Technology, 133, 5-21. https://doi.org/10.5604/01.3001.0055.8283

Vancouver

Kowaluk G, Kowalczuk A. Manufacturing and Performance of Particleboards Incorporating Recycled MDF and Particleboard Particles. Annals of WULS, Forestry and Wood Technology. 2026;133:5-21. doi:10.5604/01.3001.0055.8283

BibTeX
@article{Kowaluk2026,
  author = {Kowaluk, Grzegorz and Kowalczuk, Aleksandra},
  title = {Manufacturing and Performance of Particleboards Incorporating Recycled MDF and Particleboard Particles},
  journal = {Annals of WULS, Forestry and Wood Technology},
  year = {2026},
  volume = {133},
  pages = {5--21},
  doi = {10.5604/01.3001.0055.8283}
}
Kostenlos starten →