EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Mechanical Properties of the (81Sn–xCu–(19-x) In) % Alloys with x=1, 2, 3, 4, and 5

A.H. Al-Hammadi, Ibrahim G. H Loqman, R.M.H. AL-Hdhrami

مجلة جامعة صنعاء للعلوم التطبيقية والتكنولوجيا · 2023

DOI: 10.59628/jast.v1i2.339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift مجلة جامعة صنعاء للعلوم التطبيقية والتكنولوجيا, 2023. Verfasst von A.H. Al-Hammadi und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Research on Material Science has a long tradition, and lead has been used widely in many applications. Because of their low melting temperatures, low cost, and good wettability, tin -lead alloys have been preferred as solder alloys in industrial production, particularly in the electronics sector. However, due to the negative effects of lead on the environment and human health, studies on lead-free solder alloys have been increasing, and the subject is still important today. Furthermore, environmental protection agencies (RoHS and WEEE) have prohibited the use of lead-containing solder alloys in the manufacture of electronic and microelectronic products. In this work, the effect of adding Cu to alloys in five compositions of (81Sn-xCu-(19-x)In) % with x=1, 2, 3, 4, and 5 on the mechanical properties has been studied. The five samples were prepared from high purity (99%) elements (Sn –Cu –In ) using the melting technique. The creep of the ternary alloys was examined at different temperatures (25, 50, and 80 ) under three different loads (2.5, 6.3, and 11.4 MPa). It was found that the creep rate of the ternary alloys was increasing with the increases in Cu –content in all samples at different temperatures and loads. The mean values of the stress exponent were found to be in the range of (0.1-2.5) as well as the activation energies vaied in the range of (0.48-5.33) eV for all alloys under different loads (2.5, 6.3, and 11.4 MPa).

Zitieren

APA

Al-Hammadi, A., Loqman, I. G. H., & AL-Hdhrami, R. (2023). Mechanical Properties of the (81Sn–xCu–(19-x) In) % Alloys with x=1, 2, 3, 4, and 5. مجلة جامعة صنعاء للعلوم التطبيقية والتكنولوجيا. https://doi.org/10.59628/jast.v1i2.339

Vancouver

Al-Hammadi A, Loqman IGH, AL-Hdhrami R. Mechanical Properties of the (81Sn–xCu–(19-x) In) % Alloys with x=1, 2, 3, 4, and 5. مجلة جامعة صنعاء للعلوم التطبيقية والتكنولوجيا. 2023. doi:10.59628/jast.v1i2.339

BibTeX
@article{AlHammadi2023,
  author = {Al-Hammadi, A.H. and Loqman, Ibrahim G. H and AL-Hdhrami, R.M.H.},
  title = {Mechanical Properties of the (81Sn–xCu–(19-x) In) % Alloys with x=1, 2, 3, 4, and 5},
  journal = {مجلة جامعة صنعاء للعلوم التطبيقية والتكنولوجيا},
  year = {2023},
  doi = {10.59628/jast.v1i2.339}
}
Kostenlos starten →