EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Infrared Thermography Applied to Thermal Monitoring in Welding of Super Duplex Stainless Steel UNS S32750

Dimitry Bubnoff

Revista Iberoamericana de Ingeniería Mecánica · 31.10.2026 · 30 (2) · 3-18

DOI: 10.5944/ribim.30.2.49979 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista Iberoamericana de Ingeniería Mecánica, online erschienen am 31.10.2026. Verfasst von Dimitry Bubnoff. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal cycle monitoring during welding processes is essential for understanding heat transfer phenomena,microstructural evolution, and the resulting quality of welded joints. Traditionally, thermocouples havebeen widely used for temperature measurement, however, this technique presents limitations, including complex experimental setup, risk of sensor degradation, discrete data acquisition, and interference with the experimental system. In recent years, infrared thermography has emerged as a promising alternative for thermal monitoring inwelding processes. This technique enables non-contact temperature measurement and provides two-dimensional spatial information of the thermal distribution over the entire welded region. In this study, infrared thermography was applied to monitor the thermal behavior during welding of plates and tubes made of super duplex stainless steel UNS S32750 (SAF 2507). The results obtained through infrared thermography were compared with thoseobtained by conventional thermocouple measurements. The infrared system enabled full-field thermal visualization during the welding process, including heat flow around the weld pool and the heat-affected zone. Experimental results demonstrated that infrared thermography provides reliable temperature measurements and presents significant advantages over traditional thermocouple-based methods. The technique allows real-time monitoring of the welding process, facilitates the analysis of heat transfer mechanisms, and enables continuous spatial characterization of the thermal field. Furthermore, the results indicate that infrared thermography not only accurately reproduces thermal profiles measured by thermocouples but also provides additional information regarding spatial temperature gradients, which is essential for a more comprehensive understanding of the thermal behavior during welding. In this context, the present study contributes to the experimental validation of non-invasive thermalmonitoring techniques under real welding conditions, supporting their future integration into real-time monitoring and control systems in industrial environments.

Zitieren

APA

Bubnoff, D. (2026). Infrared Thermography Applied to Thermal Monitoring in Welding of Super Duplex Stainless Steel UNS S32750. Revista Iberoamericana de Ingeniería Mecánica, 30(2), 3-18. https://doi.org/10.5944/ribim.30.2.49979

Vancouver

Bubnoff D. Infrared Thermography Applied to Thermal Monitoring in Welding of Super Duplex Stainless Steel UNS S32750. Revista Iberoamericana de Ingeniería Mecánica. 2026;30(2):3-18. doi:10.5944/ribim.30.2.49979

BibTeX
@article{Bubnoff2026,
  author = {Bubnoff, Dimitry},
  title = {Infrared Thermography Applied to Thermal Monitoring in Welding of Super Duplex Stainless Steel UNS S32750},
  journal = {Revista Iberoamericana de Ingeniería Mecánica},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {3--18},
  doi = {10.5944/ribim.30.2.49979}
}
Kostenlos starten →