EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-parametric optimization of Wire-EDM machining on artificially-aged al6061/b 4 c composite using RSM and grey relational analysis

Subraya Bhat, Shreyas Sai, Gowri Shankar, Deepak Doreswamy

Journal of Applied Engineering Science · 2023 · 21 (4) · 1121-1131

DOI: 10.5937/jaes0-44452 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Engineering Science, 2023. Verfasst von Subraya Bhat und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire-electric discharge machining (W-EDM) is an advanced technology used for machining hard-to-cut materials with high hardness. Therefore, it is critical to characterize and model the Wire-ED machining performance for new materials having remarkable mechanical properties with respect to the multiple control parameters involved in the process. In this light, the present study investigates the multi-parametric optimization of current, pulse-on time (Ton), and pulse-off time (Toff) on material removal rate (MRR), kerf width (KW), surface roughness (R a) for Wire-EDM of artificially aged Al6061/B4C composite using response surface method (RSM) and grey relational analysis (GRA). The results of the investigation revealed that, Toff has the most significant impact on the multi-parametric response, with a percentage-wise contribution of 38% from the analysis of variance. The optimization results established that a multi-parametric combination of current - 6 A, Ton - 42.5253 ms, and Toff - 10 ms achieved the optimum response of MRR - 1.7036 mg/min, KW - 0.1727 mm, and R a - 5.6525 mm. The results obtained herewith have practical relevance to Wire-EDM industry for manufacturing applications.

Zitieren

APA

Bhat, S., Sai, S., Shankar, G., & Doreswamy, D. (2023). Multi-parametric optimization of Wire-EDM machining on artificially-aged al6061/b 4 c composite using RSM and grey relational analysis. Journal of Applied Engineering Science, 21(4), 1121-1131. https://doi.org/10.5937/jaes0-44452

Vancouver

Bhat S, Sai S, Shankar G, Doreswamy D. Multi-parametric optimization of Wire-EDM machining on artificially-aged al6061/b 4 c composite using RSM and grey relational analysis. Journal of Applied Engineering Science. 2023;21(4):1121-1131. doi:10.5937/jaes0-44452

BibTeX
@article{Bhat2023,
  author = {Bhat, Subraya and Sai, Shreyas and Shankar, Gowri and Doreswamy, Deepak},
  title = {Multi-parametric optimization of Wire-EDM machining on artificially-aged al6061/b 4 c composite using RSM and grey relational analysis},
  journal = {Journal of Applied Engineering Science},
  year = {2023},
  volume = {21},
  number = {4},
  pages = {1121--1131},
  doi = {10.5937/jaes0-44452}
}
Kostenlos starten →