EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for 1.2709 steel produced via L-PBF

Balázs Lőrincz, István Hatos

FME Transactions · 2026 · 54 (2) · 226-233

DOI: 10.5937/fme2602226l ↗

Kurz gefasst

Fachartikel in der Zeitschrift FME Transactions, 2026. Verfasst von Balázs Lőrincz und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (L-PBF) enables the creation of advanced metal parts that are difficult to manufacture conventionally. In this study, the model parameters of the Johnson-Cook (JC) constitutive relation and the damage parameters of the JC failure model for 1.2709 steel produced via L-PBF were determined. Constitutive parameters were identified from quasi-static uniaxial tensile tests conducted on smooth specimens. In contrast, stress triaxiality-dependent damage parameters were determined using tensile tests on notched round bar specimens in combination with FEM simulations. The load-displacement curves showed good agreement with the experimentally obtained data. The strain-rate-dependent failure model parameter was determined by correlating Charpy impact test results with numerical simulations. Reasonable agreement between the simulation and experimental results was achieved. The results demonstrate that the proposed experimental-numerical framework provides a reliable basis for modelling both the quasi-static and impact fracture behaviour of L-PBF-fabricated 1.2709 steel.

Zitieren

APA

Lőrincz, B., & Hatos, I. (2026). Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for 1.2709 steel produced via L-PBF. FME Transactions, 54(2), 226-233. https://doi.org/10.5937/fme2602226l

Vancouver

Lőrincz B, Hatos I. Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for 1.2709 steel produced via L-PBF. FME Transactions. 2026;54(2):226-233. doi:10.5937/fme2602226l

BibTeX
@article{Lrincz2026,
  author = {Lőrincz, Balázs and Hatos, István},
  title = {Determination of Johnson-Cook parameters and evaluation of Charpy impact test performance for 1.2709 steel produced via L-PBF},
  journal = {FME Transactions},
  year = {2026},
  volume = {54},
  number = {2},
  pages = {226--233},
  doi = {10.5937/fme2602226l}
}
Kostenlos starten →